Stuff FS: OEM, aftermarket, etc.
 

Lets get right to this...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235263

Attachment 235264

NIB Timing belt leftover from a couple timing belt changes. Purchased from Rosenthal some time ago. This should fit 90-05, but do your homework and confirm before purchasing.Belt only, idler pictured is already sold.

Belt: $20

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235265

Random belts! New! Never installed! Again, do your homework and confirm specific fitments before purchasing. I'm guessing alternator, and NB with AC & PS
K040372: SOLD
K040338: $5
4PK 945: $5

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235266

Attachment 235267

NIB SINGLE (1) Mazda Comp motor mount. Not sure how I ended up with this TBH.

Comp mount: $35

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235268

Used angled 3 gauge single din mount. Super flimsy until you get gauges in it, then it stiffens up a bit.

3 gauge mount: $5 with something else

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235269

Attachment 235270

Attachment 235271

Attachment 235272

Used Wilwood BP-10 brake pads, Dynalite 7112 fitment. These should work with any of the Miata Big Brake Kits (Goodwin, 949, TSE, older FM) that use the Dynalite Wilwood 4 piston calipers. These are fine for street use but I wouldn't get them anywhere near an HPDE event.

BP-10: $20

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235273

Attachment 235274

Used NB stock throttle body. No IACV, no TPS, comes with free oxidation and grime. Seals fine and no real damage anywhere, its just ugly. Not sure what you are going to do with this thing.

NB TB: $15

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235275

Attachment 235276

Attachment 235277

Turbosmart IWG75 adjustable internal wastegate actuator. I purchased this "used" but the thing looks like its never been mounted. I scarred up the locking ring eversoslightly while trying to remove the ring to open it up and check the spring. Includes box, mini disc, sticker, nuts, etc. This should have enough throw to work with a BEGI or FM turbo kit once you fabricate a mount. Its preloaded with a 7psi spring so perfect upgrade for a 2560 w/EBC. Get a bigger spring and run ALLOFIT. This thing has a long enough arm and enough throw that it would probably work just fine for most Garrett IWG turbos, after you fabricate some sort of bracket. These sell for about $170~$180 new. I paid $150 so you pay $150.

IWG-75: $150

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235278

Attachment 235279

Attachment 235280

NIB Innovate Motorsports LC-1 wideband. NO GAUGE! As you can see, its never been installed. Everything is in the box including the pesky serial cable and terminator. Wideband sensor itself still has the factory silver anti-seize compound on the threads. NO GAUGE!

LC-1: $120

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Attachment 235281

Attachment 235282

NIB: Innovate Motorsports AutoTimer. Its like a turbo timer, but does a bunch of other crap as well. Such as being an AFR display for the above listed LC-1. hint-hint.

AutoTimer: $50
AutoTimer + LC-1: $165

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~

Before you ask, I'm located in the Peoples Republic Of California.

Terms and Conditions:

All prices are OBO but don't get crazy. Go look things up on Amazon or something before you try to lowball me. Buy multiple things and I'll consider knocking off a little bit here or there.

Caveat emptor. Know and understand what you are buying before you commit. I've attempted to photograph things or describe them as best I can, but do your own research and ask questions. Knowledge is power.

I don't mind you calling dibs but you better be prepared to follow through. Post up in this thread if you want something, I don't want eleventybillion PMs to sort through. I'll update the OP as things sell.

I ship at buyers expense. I tend to send things via USPS Flatrate because its cheap and easy and there is a post office across the street from my place of business. If you want FedEx or UPS I can accommodate, but its going to take me a little extra time to get things shipped out. I'm not interested in shipping to Canada unless you make it worth my while. I'll supply tracking or reference numbers as they are available.

I accept payment via Paypal. Send it as a gift or add 3% to cover fees. The choice is up to you. I tend to ship to the address on the Paypal invoice and I may ask you to verify this information before something goes in the mail.

I expect you to leave iTrader feedback. Good/Bad/Indifferent I don't care just made sure you do it. I will definitely be leaving you feedback one way or another.

I reserve the right to ignore you or discriminate against you based on your post count, props score, iTrader feedback, etc. If you are an ass then I probably don't want to put up with you. Postwhoring n00bs will be reported.

Don't quote images back to me when responding that you want something. This will most likely trigger the above discrimination clause.

Thanks for looking! :party:

in for discrimination :giggle:

I would like the fuel rail and defrost pigtail. PM sent

You have a pm

Oops did not realize that the previous post was for the seller

Pretty sure that harness is NA8 (94-95).

PMd you, I'm interested in the LC1 and gauge plate for $130. I have low post count but been here for years. I can PayPal asap.

Daammmmmit... I am second in line for the fuel rail unless someone tells me I don't need this. Why don't you need this?

Interested in the fuel rail if Hammer doesn't follow through.

Ill take the gates K04372 + Idler Pulley

My email is lancewhitehead995@gmail.com if you can send me your paypal info since I cannot PM yet.

Good deals! Bump for you man!

https://www.miataturbo.net/attachmen...ine=1411378663
I need the fuel rail, still waiting for a reply form the seller

I'll take the following shipped to 47201, PM me a total shipped price for payment good sir.

NB FPR: $40
NIB Miata OEM fuel filter: $10
NIB Innovate Motorsports weld-in wideband bung: $5
3 gauge mount: $5
NB38-67-080 Mystery harness: $20

Sorry guys, boss surprised me with a surprise trip to Arizona, and now I'm sitting on a runway in a broken Lear jet (balla!)

I'll sort through the posts & PMs tonight. Sorry for the chaos!

No problem life happens.

Rich people problems =)

that would be my boss. i was forced to fly like a peasant in the king air instead. did i ever tell the story about when our network engineer drove to tahoe to reboot his router? :hahano:

ive got like a billion pms now. when i can sit down this evening i'll make sure to reply to everyone. i'm flying back tomorrow late so the earliest things can go in the mail is going to be wednesday.

sorry for the delay, i appreciate everyones patience with me.

Potential buyers responded to via PM and email, OP updated. Lets move some more stuff! :bigtu:

Payment sent this morning for my things.

Got it! I'll go in the mail this afternoon. Thanks Harold! :party:

In fact everything is packed up and ready to go.

HHammerly, slammed200 and CompleteXen (provided he gets me a shipping address) will have packages in the mail before the end of the day.

Because I also have an M-Tuned rail sitting in my pile o' parts :burncash:

OP updated. LC-1 (with revised pricing) and 3 gauge mount are back on the block. Sorry to everyone I told the mount was already sold.

Make me offers people!

Shipping address sent! Were you able to ship it all out today?

Yessir! Everything made it in the mail, including your box. I'll email you a tracking number tonight :bigtu:

Just left everyone iTrader feedback, so it felt like a good excuse to bump this up. Buy more stuff people!

Mishimoto Oil Sandwich Plate Adapter has found a new home, OP updated :bigtu:

Page 5 bump. Make me offers people!

I'll take the 4PK 945 belt. Mine squeals.

total price shipped to 97006?

Like, $11? I have USPS Flatrate Small boxes that ship for $5.95 to anywhere in the US. I kinda intended those as add-on items. Is $11 worth it? I honestly dont know what these sell for new. Either way LMK ;)

That's like $1 less than autozone lol lemme see if there's anything else I need from you. Totally would have bought your whole innovate setup 2 months ago, tee hee.

Maybe the 3 gauge mount? .... do you have any other special goodies in your pile? Stashed away any 6ULs? :idea:

I actually DO have a grip of other stuff I haven't sorted out yet, but motivation is low until I sell this load. My intention was to start another thread, or maybe close this one and add the leftovers to another one.

No extra 6ULs though, I'm keeping the 2 sets I have now. :giggle:

OK, well I'm not in a big rush or anything, just thought I'd snag it. I'll wait for your other thread and pick up one of these 'add-on items' when the time comes :)

I bumps you ups!
http://static.squarespace.com/static...1406163319738/

Really? No one needs a wideband?

Miata.net members told us that we can run all of it on stock ECU so no need... :)

Bump for you

Wideband and timer may be pending. Bump for other stuffs.

Actually, if it sells I'll probably close this thread and start another one with leftovers plus more random stuff. :rofl:

In for new thread with more stuffs I might want.

I'll take that three gauge panel! I can't PM yet but if you email me at Alexkcaruso@gmail.com, my PayPal is ready.

Wideband and timer are now sold.

Akc5132: Its not worth shipping that thing by itself, combine it to something else and I'll be happy to throw it in the box but you will need to watch for the other thread.

Closing this thread up and opening another some time next week. Thanks to everyone who helped clean out my garage and fund my sickness :giggle: If I forgot to send you iTrader feedback, please PM me and I'll take care of it.