Suspension/Chassis/Brake/Exhaust/Intake etc. Goodies
Finally gathered up all the parts I have laying around. As follows (prices/pictures/detailed description in CL links):
Suspension/Chassis Goodies: 1990-97 Mazda Miata Race Suspension Parts 1. SOLD -- Flyin' Miata Butterfly Brace 2. SOLD -- Flyin' Miata Rear Shock Mounts (12mm for Koni) with foam bumpstops 3. Flyin' Miata Rear Shock Mounts (12mm for Koni) with rubber bumpstops 4. SOLD -- Koni Yellow Sport Shocks 5. SOLD -- Ground Control Coilover kit for Koni with 400F/275R Eibach Springs 6. Eibach Spring Set (2 Springs) GC180.64.35 (7" 2.5"DIA 200lb/in) 7. SOLD -- Eibach Spring Set (2 Springs) 0700.250.0325 (7" 2.5"DIA 325lb/in) 8. SOLD -- Eibach Spring Set (2 Springs) 0700.250.0500 (7" 2.5"DIA 500lb/in) 9. Eibach Spring Set (2 Springs) 1000.250.0375 (10" 2.5"DIA 375lb/in) 10. Eibach Spring Set (2 Springs) 1000.250.0425 (10" 2.5"DIA 425lb/in) Brake Goodies: 1990-97 Mazda Miata Race Brake Parts 1. Goodwin Rear BBK 2. SOLD -- Hawk HPS Brake Pads for OEM Rear 3. Hawk HPS Brake Pads for Wilwood Dynalite Calipers 4. Hawk HP+ Brake Pads for OEM Front 5. Hawk HP+ Brake Pads for OEM Rear 6. Hawk HP+ Brake Pads for Wilwood Dynalite Calipers 7. Wilwood BP10 Brake Pads for Wilwood Dynalite Calipers Exhaust/Intake Goodies: 1990-97 Mazda Miata Race Exhaust and Intake 1. SOLD -- Flowmaster dBX Exhaust Kit 819110 (Spec Miata Legal) 2. Enthuza NA Racer 2.5" SS Exhaust 3. SOLD -- Jackson Racing Cold Air Intake (1994-97) Interior/Shifter/Gauge Goodies: Mazda Miata Interior Parts/Gauges 1. Momo Shift Knob 2. Mazdaspeed Brand Short Shifter Kit 3. SOLD -- Dual A-Pillor Gauge Pod 4. SOLD -- Autometer Pro-Comp Ultra-Lite 2 1/16" Vacuum/Boost Gauge Everything is +shipping. I'd rather not ship the Butterfly brace though. |
I'll take that gauge pillar/boost gauge off your hands. I'm not sure if I can PM yet, but let's figure out what shipping would be and I'll send payment your way.
|
Specs on various Eibach springs?
|
Originally Posted by Octane
(Post 1192336)
I'll take that gauge pillar/boost gauge off your hands. I'm not sure if I can PM yet, but let's figure out what shipping would be and I'll send payment your way.
Originally Posted by Greasemonkey2000
(Post 1192341)
Specs on various Eibach springs?
Ground Control Coilover Kit for Koni Shocks w/Eibach 400F/275R Springs (1990-97) $250 Ground Control Coilover Conversion 375/250 for Miata 1990-1997 Eibach Spring Sets ($60 for each set of 2 springs): 7" Springs 2.5 x 7 : Performance Shock, Inc GC180.64.35 (7" 2.5"DIA 200lb/in) 0700.250.0325 (7" 2.5"DIA 325lb/in) 0700.250.0500 (7" 2.5"DIA 500lb/in) 10" Springs Standard ERS Spring : Performance Shock, Inc 1000.250.0375 (10" 2.5"DIA 375lb/in) 1000.250.0425 (10" 2.5"DIA 425lb/in) |
The bbk shows to be the 90-93 variant, just confirming this is not applicable for 94-97.
|
interested in the enthuzcar catback. any idea what shipping runs on one of those?
and that will fit a 1.6 as well as a 1.8 correct? (i have a 1.6). and what's wrong with the resonator? just rusted out? |
Originally Posted by TheBandit
(Post 1192390)
The bbk shows to be the 90-93 variant, just confirming this is not applicable for 94-97.
Originally Posted by KasbeKZ
(Post 1192409)
interested in the enthuzcar catback. any idea what shipping runs on one of those?
and that will fit a 1.6 as well as a 1.8 correct? (i have a 1.6). and what's wrong with the resonator? just rusted out? |
Would you ship the butterfly brace to Los Angeles?
|
Thanks for the clarification on the bbk. This will be for a 95 chassis. So if I understand correctly this will utilize stock calipers (no special hose req'd) and I will need pads. Will your hawks fs work for this? It will be a combo autox and track car (with emphasis on autox). Did you have any issue running this with stock front brakes or are upgraded fronts a necessity?
|
Gauge Pod and Vacuum/Boost Gauge sold to Octane.
Originally Posted by DaRuski
(Post 1192435)
Would you ship the butterfly brace to Los Angeles?
Originally Posted by TheBandit
(Post 1192443)
Thanks for the clarification on the bbk. This will be for a 95 chassis. So if I understand correctly this will utilize stock calipers (no special hose req'd) and I will need pads. Will your hawks fs work for this? It will be a combo autox and track car (with emphasis on autox). Did you have any issue running this with stock front brakes or are upgraded fronts a necessity?
Someone else has asked for the HPS rears. Still have the HP+ rears, which is a better pad anyway. Just PM or text a zip and I can let you know the shipping on this. |
butterfly brace
Is this the butterfly brace by itself or also the rails?
|
Originally Posted by konmo
(Post 1192573)
Is this the butterfly brace by itself or also the rails?
|
Oops, sorry Rick I didn't realize there was links. :(
|
Originally Posted by hornetball
(Post 1192572)
Someone else spoke for it earlier, but they haven't paid yet. You're next. I'll let you know if the first deal falls through.
|
JR CAI sold.
|
Set of rear HPS pads and Flowmaster dBX catback sold.
|
Cut me a deal on the butterfly brace + all of the dynalite pads you have?
I'll be in Alvarado on the 9th, no boxing or shipping required. |
Originally Posted by calteg
(Post 1192898)
Cut me a deal on the butterfly brace + all of the dynalite pads you have?
I'll be in Alvarado on the 9th, no boxing or shipping required. |
SOLD two sets of Eibach springs to EO2K (set of 0700.250.0325 and set of 0700.250.0500).
|
Interested in both pairs of Koni Sports, GC coilovers and a set of the rear shock mounts. Cost to ship to Canada preferably USPS (United States Postal Service) *NOT* UPS? Postal Code L6M3M9. Is the only thing needed from that package two pairs of FM Bumpstops? Can't tell from the picture of the tophats if those are bumpstops or some other washer / spacer.
Thanks! |
All times are GMT -4. The time now is 06:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands