Turbo Miata Partout - 4/30 Price Drops!!
27 Attachment(s)
Due to some unfortunate circumstances I have decided to part out my project car, I'm giving MT.net guys first dibs before I start posting this stuff up on other forums. All prices do NOT include shipping, I am located in the west chicago suburbs. If you think a price is too high for an item feel free to shoot me a PM. Also I will be taking pictures of these items over the next couple days, I work 11-12 hour days and may take me upto a week to ship a large item.
OEM Silver Hardtop - OEM defrost/headliner hardtop with all latches and in very good condition, still OEM silver paint. Local pickup only on this item. https://www.miataturbo.net/attachmen...ine=1364772037 https://www.miataturbo.net/attachmen...ine=1364772037 6 Speed Transmission - Came out of a 2001 SE, confirmed 18,xxx miles when pulled and has a warranty until the end of april. Pretty much brand new! https://www.miataturbo.net/attachmen...ine=1364772037 https://www.miataturbo.net/attachmen...ine=1364772037 https://www.miataturbo.net/attachmen...ine=1364772037 Built Shortblock - 2250.00 Was told this was a FM shortblock but I do not have any proof of this. Wiesco pistons, scat rods, ACL bearings and crank scraper. ARP hardware for rod bolts and mains. The previous owner only put about 5 miles on the motor before I purchased the car, it is pretty much brand new. Comes with tapped oil pan, front covers and crank pulley. M-Tuned Fuel Rail - SOLD Used and tabs have been notched to be used on a 99-00 head, comes with fittings, OEM mazda pulse dampner and lines. SB Clutch - KMZ03-HD-DXD 6 puck model, good for 350ft/lb with a soft pressure plate feel. Comes with cluch disk, pressure plate and throwout bearing, brand new and sealed in box. https://www.miataturbo.net/attachmen...ine=1364772037 ARP Headstuds for BP1.8 - 110.00 Brand new still in sealed box, a must for turbo miatas. https://www.miataturbo.net/attachmen...ine=1364772037 Sparco Seat - Sparco Sprint JR seat in great condition, comes with a Gforce 5 point harness, stock miata sliders along with a wedge engineering seat bracket. Complete bolt in with miatas. https://www.miataturbo.net/attachmen...ine=1367330656 MS2 99-00 - Built by Brian, has Boost control, MapDaddy for up to 44psi of boost sensing, expansion board for alternator, CEL, battery light, A/C, fans, clutch/neutral switch and the sequential injection module. Koyo Radiator - Koyos 55mm model with slim fans, no leaks or cracks and fins are in great condition! https://www.miataturbo.net/attachmen...ine=1364772037 https://www.miataturbo.net/attachmen...ine=1364772037 Bell Dual Tip Exhaust - This is their 3" dual tip model, comes with axle back and mid section. Buying new from bell would be almost a grand! ACT Flywheel - Never ended up having time to have this cut, run it as is or get a couple thousands taken off the top, this is their 13.5LB model, comes with ARP hardware. HKS SSQV - 110.00 Real HKS unit, comes with flange, C-clip and gasket for install. http://i834.photobucket.com/albums/z...ps227db132.jpg Attachment 185593 FM Oil Cooler setup - This unit is in great shape, this is FMs older model with vinyl lines instead of the newer SS revision. FM Butterfly Brace - Over all in great condition, no dings dents or rust. FM BMC Heatshield - 60.00 Comes with BMC heatshield, tossing in the other two heat shields for the turbo manifold seen below. Attachment 185594 Miata clutch slave with SS line - 60.00 Great shape, did not leak when pulled from the car. Attachment 185595 Forge Intercooler - 230.00 Brand new, never used and the fins are in great shape! Attachment 185596 Attachment 185597 |
I'm interested in the 6UL 15x9 wheels. What will you take without a trade?
|
Dumb question.
Didn't have the turbo itself yet? |
Interested in:
- Wheels - Clutch - Complete motor or just the short block - Tein's What I have for partial trade: - 15x7 XXR wheels - 15x8 6UL's in rough visual shape (spray painted, straight) - 205/50/15 Falken 912's to go with either set of wheels - Super low mileage FM VMaxx (non adjustable) - "JDM" 1.8L motor The only problem is that I am in Los Angeles but I might be able to arrange delivery/pickup of parts through one of my truck driver friends. |
Originally Posted by Adamsm
(Post 994416)
I'm interested in the 6UL 15x9 wheels. What will you take without a trade?
Originally Posted by Chiburbian
(Post 994432)
Dumb question.
Didn't have the turbo itself yet? |
How many miles on the reroute?
|
Originally Posted by redturbomiata
(Post 994458)
How many miles on the reroute?
|
I want the 6uls, pm me about the tires, miles, etc.. Paypal ready.
|
Hey im local intrested in motor can you pm me your number? Im in carol stream.
|
Very interested in the 6UL's, have Paypal and stock wheels from a 99 or stock daisy's I could trade with if either of those interest you. Potential for local pickup also...PM me...
|
Originally Posted by Zander
(Post 994693)
Very interested in the 6UL's, have Paypal and stock wheels from a 99 or stock daisy's I could trade with if either of those interest you. Potential for local pickup also...PM me...
|
Im interested in the intercooler kit and bov.
Can you post some pics of those items. |
Coolant reroute sold! I'll have pictures for most of this stuff this weekend, thanks guys!
|
6ULs sold, NRG hub added and pictures added.
|
Wilwood BBK sold!
|
1 Attachment(s)
I wanna shift that trans...I bet it feels like...
https://www.miataturbo.net/attachmen...ine=1364796466 |
If you ever smoke enough crack to consider shipping the hard top to TX, let me know.
|
Originally Posted by czubaka
(Post 996254)
If you ever smoke enough crack to consider shipping the hard top to TX, let me know.
FIC injectors sold. |
Do you have any guesstimate on what shipping/insurance would cost? Zip is 77339.
|
Butterfly brace and rails right? Just want to get an idea on what shipping might be to 60016
|
Originally Posted by czubaka
(Post 996536)
Do you have any guesstimate on what shipping/insurance would cost? Zip is 77339.
Originally Posted by Miahtahere
(Post 996604)
Butterfly brace and rails right? Just want to get an idea on what shipping might be to 60016
|
Originally Posted by hobbs
(Post 996607)
I am only selling the 3 piece butterfly brace, I'm out in the west burbs so I'm local.
But on the other hand, what's your waist on the seat setup? |
Butterfly brace and rails right? Just want to get an idea on what shipping might be to 60016 |
Originally Posted by Silentoreo34
(Post 996719)
You know you're local right?
Yes, I got that from his response when he said.... "i'm local". |
how much to ship the head to 02860?
|
Originally Posted by psyber_0ptix
(Post 996834)
how much to ship the head to 02860?
Intercooler kit sold! |
Yes, I got that from his response when he said.... "i'm local". |
payment sent for the head
|
You said that the fuel rail was notched to fit the 99-00 head, what other years will it d
fit? Just wondering if it will fit a 94 BP in a Protege? |
Originally Posted by psyber_0ptix
(Post 998459)
payment sent for the head
Originally Posted by mx3optidrive
(Post 998497)
You said that the fuel rail was notched to fit the 99-00 head, what other years will it d
fit? Just wondering if it will fit a 94 BP in a Protege? |
Can I get pics of the rail from the other side where the injectors go in? I just want to see if I can use my adjustable regulator in place of the stock regulator. Thanks.
|
What would you take for the fuel rail shipped to me in NS, Canada?
|
Money sent for rail.
|
Hey pm me harness bar price shipped to nj 07860 thanks
|
How's $110 shipped for the ARP headstuds sound? Have paypal ready to go.
|
Bump, removed stuff that has been sold and recieved by people, added some pictures and did some price changes.
Originally Posted by Oscar
(Post 1006179)
How's $110 shipped for the ARP headstuds sound? Have paypal ready to go.
|
how much for the injectors, hks, and the intercooler and piping??? im in Charlotte nc 28215
|
Originally Posted by 19miata94
(Post 1007014)
how much for the injectors, hks, and the intercooler and piping??? im in Charlotte nc 28215
|
MS2 ECU Sold!
|
MS sold to me thank hobbs...
|
Originally Posted by hobbs
(Post 1007139)
Only the SSQV is left of those items.
|
Got the fuel rail yesterday. Everything is great. Thanks!!!
|
I want heat sheilds and the piping in pic
|
Very interested in the seat, what's the width, what's your waist size and how did you fit?
|
All times are GMT -4. The time now is 05:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands