|
Turbo Partout - FM, ARtech, MS, Injectors, more!
3 Attachment(s)
Parting out my turbo setup.
Stuff I have for sale -FM Log Mani, about 10k miles - 250 + shipping -GT2560 Chinacharger, about 6k miles - 75 + shipping -3" ARtech DP (Goes with catback) (Flange welded on strait) -3" turboback (Goes with DP) (Note: NOT an ARtech piece. It's crude but it works) - 450 + shipping with DP -CXracing IC. Don't remember the size, it's the same one that 90% of people use here - 80? no idea how much to ask -IC pipes - what do you need? -Brain-built MS-I with harness - 250 + shipping -LC1 - Pending -Racelands - Pending -Stock 01-03 SE wheels painted white. Shitty paint, peeling. Yoko Parada Spec 2s with about 3k miles, 1 autox on them. - 400? -460cc 88 RX7 injectors + harness. No pintle caps. - 75 + shipping -Also have Corbeau Forza, no rails - Sold -Ebay F1 Racing PP and ACT HD Unsprung ceramic - held 220rwhp and isn't too uncivilized. bout 10k miles - 100 + shipping? Bunch of other stuff, pics tell the rest of the story. Less than 10k miles on everything. https://www.miataturbo.net/attachmen...ine=1310686086 https://www.miataturbo.net/attachmen...ine=1310686086 Car made 219rwhp at 12.5psi. Dyno plot: https://www.miataturbo.net/attachmen...ine=1310686086 Have koso oil pressure gauge, full setup, and a boost gauge. Boost gauge is a pile of shit ebay piece. Get it off my hands for shipping. No gauge face. Will get better pictures tomorrow. Make offers. OH and unfortunately I can only accept money order or certified check |
how much you want for the lc1?
|
pm'd
|
How much for Megasquirt?
|
300 shipped?
|
Everything except wheels, clutch and rad available.
|
1.5k + shipping for turbo hardware + electronics
|
Looks like the turbo kit requires hood trimming and does not allow for radiator fans. Is that correct?
|
Yes, IC piping would have to be redone. Both sides are bad. But there is enough there to redo it with little money.
|
Pop the motor or something?
|
In for pics of intercooler and piping? How much shipped to ca. 91311?
Have a great day, Jared |
Originally Posted by Der_Idiot
(Post 747185)
Pop the motor or something?
|
Originally Posted by Jfornachon
(Post 747189)
In for pics of intercooler and piping? How much shipped to ca. 91311?
Have a great day, Jared |
Is there extra I/C pipes or is just what is on the car?
Have a great day, Jared |
pm'd
|
I have 2 sections of 4' 2" aluminum piping and a couple of spare couplers lying around.
The IC setup will need to be modified, as you saw, and it will also need a new 2.5" to 2" reducer and a 2.5 to 2" 90* reducer. Will discount the price as necessary. Parts will begin coming off next Sunday |
Thank you. I will let you know in the next few days.
Have a great day, Jared |
How much for the fm mani? Also how much for the injectors
|
I thought they were listed $100 yesterday...maybe that was a different thread?
|
No, that was this thread. I took the prices off.
|
Originally Posted by MiataMX5
(Post 747346)
How much for the fm mani? Also how much for the injectors
Injectors are pending. But I haven't heard from the guy in a while. Will do 75 + shipping. BTW, a lot of people have asked about paypal so I'll say this again: I cannot take paypal. Money order or certified check only. I would prefer a certified check as it's much safer than sending cash... |
Pics of the artech dp, and exhaust.
|
2 Attachment(s)
|
Best of luck, just don't get a DSM.
|
Thanks :).
Wanna get a 328is or M3 (E36 for both) |
4 Attachment(s)
Pics of exhaust:
Attachment 187454 Attachment 187455 Attachment 187456 Attachment 187457 Exhaust fitment isn't great but it works as is and it is very fixable. Bangs on very hard right hand turns. |
9 Attachment(s)
Nice SS oil catch can:
Attachment 187443 Begi SS drain line: Attachment 187444 Oil feed line + fitting for turbo from Begi Attachment 187445 Oil line wraps around the front of the engine to a T which I ran the feed to the turbo and an oil pressure sender. LC1 + gauge Attachment 187446 Attachment 187447 Parada Spec 2s on stock 01-03 SE wheels Attachment 187448 IC + assorted pipes Attachment 187449 Attachment 187450 Attachment 187451 Everything not listed as sold is still up for sale. Don't hesitate to ask for pictures. |
No offers on more? Really? Are people scared off by no paypal? I have a good rep here, I've done lots of money order transactions...
|
Originally Posted by rider384
(Post 749349)
No offers on more? Really? Are people scared off by no paypal? I have a good rep here, I've done lots of money order transactions...
That being said, I'm interested in your radiator if you're selling it. |
Sorry to see you go squirtle.
|
racelands
can i get dibs on the racelands if it falls thru?
|
You're like 5th in line for the racelands. I will let you know, but don't get your hopes up.
Pusha, I am selling the rad with the car unless I can get a good deal on a stocker. I will let you know if I do. |
you have a PM
|
Do you have the drill bit and tap for the oil return?
|
I believe I do
|
I think I still have my stock rad laying around I can sell you, make an offer ;)
|
re
how much did you make with this kit?
|
racelands
did these sell?
|
you PM box is full. here is what I was going to send.
I noticed you listed parts individually. what would be the price for the whole turbo setup? and you dont mention oil and water lines, or the BOV. would those be included? Also, I am not concerned with the IC routing since I have a slimline fan, so thats likely to clear okay. would the IC piping provided be complete? how big is it? Also, i would need larger injectors, your come with Harness, i assume that needs to be sliced in? details? and was your map tuned? can you provide that? hopefully I can convert it to adaptronics. LMK |
How much for the catch can shipped? Thanks :)
|
Pending:
-FM Mani -Chinacharger -IC + Pipes -Oil feed + return -Injectors + harness -Catch can -DP Still for sale: -3" catback (Strait pipe with Magnaflow 14419 muffler) -MS -LC1 -Koso OPG -2 pod a pillar mount Trigger, the BOV is all that is available. And my map was tuned by me, but I'm no expert. |
Originally Posted by rider384
(Post 751677)
Pending:
-FM Mani -Chinacharger -IC + Pipes -Oil feed + return -Injectors + harness -Catch can Trigger, the BOV is all that is available. And my map was tuned by me, but I'm no expert. |
2 Attachment(s)
Here are some pics of the exhaust:
https://www.miataturbo.net/attachmen...ine=1311366321 https://www.miataturbo.net/attachmen...ine=1311366321 125 + shipping. Stainless steel pipes. Last piece of hardware left. I still have: Brain-built DIYMSI - 250 + shipping LC1 - 125 + shipping a-pillar mount |
Is the Megasquirt still available. If so, what is shipping to 61264
|
LC-1 still avaliable? pm me.
|
I'd be interested in the MS. What's the inverted spark for?
|
LC1 still available? How much?
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Sorry, haven't been on in a while. everything is sold.
|
| All times are GMT -4. The time now is 02:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands