550 Rx7 Injectors 4 sale
550 Rx7 Injectors 4 sale
01-11-2011, 09:15 AM
#6
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,022
Total Cats: 304
It means they are Low Impedence not high Impedence. Good Luck With Sale.
Stock miata injectors are high impedence, as are RX7 injectors part numbers: 195500-1370 and 1350. The ones you have may physically fit a miata, but you will need a low impedence injector driver to run them.
Injector impedance describes the electrical resistance of the solenoid windings. These are usually grouped in two categories:
Low- 1.7 to 3.0 ohms (Peak and Hold Driver/Injectors) High- 10 to 16 ohms (Saturated Circuit Drivers/Injectors)
Stock miata injectors are high impedence, as are RX7 injectors part numbers: 195500-1370 and 1350. The ones you have may physically fit a miata, but you will need a low impedence injector driver to run them.
Injector impedance describes the electrical resistance of the solenoid windings. These are usually grouped in two categories:
Low- 1.7 to 3.0 ohms (Peak and Hold Driver/Injectors) High- 10 to 16 ohms (Saturated Circuit Drivers/Injectors)
0
01-11-2011, 11:21 AM
#7
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
I'm sorry. I know about impedance etc. I meant what does the GLWS meant ?
I was going to drive them with a MS and use a resistor if need be.
Thanks for clarifying for me .
I was going to drive them with a MS and use a resistor if need be.
Thanks for clarifying for me .
0
01-11-2011, 12:00 PM
#8
Junior Member
Join Date: Sep 2010
Location: SFL
Posts: 369
Total Cats: 3
where in FL are you located? i might be interested if you have some pictures of them.
0
