various Miata parts
n one easy listing :)
All parts are in Boston. All "best offer", plus whatever additional shipping, which should be reasonable. Just trying to clean out the the utility room so I can actually reach my washer and dryer. Not for long, I'm sure. 1. I ended up with an extra set of Energy Suspension poly bushings and sleeves. New, unused. They fit upper control arm of NA and NB Miatas. Again, this is just for upper control arms, not the entire front set for uppers and lowers. $25. http://mikest.com/ebay/ES%20Bushings%20FUCA.jpg 2. A good non-leaking heater core with housing from a '90 Miata. Asking $40. http://mikest.com/ebay/NA%20Heater1.jpg http://mikest.com/ebay/NA%20Heater2.jpg 3. 1.6 calipers in good shape, just came off the CSP NA which had excellent braking, and balance IMHO. Also have front non-sport 1.8 calipers from an NB with 50K miles. As these are in various shapes after sitting in the basement for a while... if anyone needs them, come get them. Small amounts of good beer are appreciated, but not at all necessary :) 4. A radiator fan (driver's side) taken out of a parted NA. Worked fine when taken out of the car last August. Asking $40/bo. http://mikest.com/ebay/Fan1.jpg http://mikest.com/ebay/Fan2.jpg 5. Stock diff mounts. They are fairly rusty, but could be cleaned up and painted/powder coated. Good for putting on poly bushings on your diff - you can remove rubber and prep them before install. $10 a pair. http://mikest.com/ebay/nb%20diff%20mounts_1.jpg 6. A small front lip from an NB Miata, '99-00. In good shape, no broken plastic. It's Mazda p/n NC10-51-9K0A and seems to go for %107 on Amazon: SOLD. 7. Seat rails from an NB Miata, passenger side. Will also fit an NA. Includes the seat belt receptacle. In excellent condition. $25 pus shipping or best offer? If someone needs the driver's side, I might have that, too. Ended up with a few extra NA and NB rails and some receptacles. https://cimg1.ibsrv.net/gimg/www.mia...a554c16132.jpg https://cimg0.ibsrv.net/gimg/www.mia...42c9d0ab1a.jpg 8. Seatbelt receptacle from an NB1 in good condition. Should work on NA or NB Miata. $10. https://cimg6.ibsrv.net/gimg/www.mia...8aa5912dc1.jpg https://cimg7.ibsrv.net/gimg/www.mia...9950f54bcc.jpg 9. One rear end link from my NB Miata with under 40K miles. In good shape, works fine, i just don't use the rear sway bar on my autocross car. Might work on NAs as well. First $10 gets it. https://cimg9.ibsrv.net/gimg/www.mia...4ff013a57a.jpg |
Bump. Any offer if someone needs it.
|
$50 shipped or BO.
|
Still here.
|
1.6 calipers, full set with pads
1.6 calipers in good shape, just came off the CSP NA which had excellent braking, and balance IMHO.
2 fronts with nearly-new stock pads - $60 plus shipping 2 rears with more than half of HP+ pads left - $60 plus shipping. All 4 for $100 plus shipping from Boston. Let me know if you'd like to see pics or need any other info. |
Do both of the parking brake mechanisms work on the rears?
|
They seem to, John. At least the e-brake worked fin when they were on the car two months ago.
|
Rear NA knuckles with delrin bushings
Seems to work well, the bushings are already pressed in, saving you the hassle. What you'll see is what you'll get. $40 a pair plus shipping or an offer? Have no idea what these are worth so...
https://cimg9.ibsrv.net/gimg/www.mia...2fe0b4d353.jpg https://cimg0.ibsrv.net/gimg/www.mia...bb42652e9c.jpg |
Can also include HP+ pads for the front, about half life or more left.
|
Radiator fan
A radiator fan (driver's side) taken out o a parted NA. Worked fine when taken out of the car in August.
Asking $50/bo plus shipping. http://www.mikest.com/Fan1.jpg http://www.mikest.com/Fan2.jpg |
Still available. $40? Offers?
|
Still available. Any decent offer to get them out of my basement.
|
NA and NB fans are different FYI
|
Thanks for letting me know! This is from an NA.
|
$30 plus shipping for a pair?
|
Still available. I also have front non-sport 1,8 calipers.
|
Still available if anyone needs it. Best offer.
|
$30 plus shipping?
|
Knuckles, knuckles, get your knuckles here!
|
NA heater core
A good non-leaking heater core with housing from a '90 Miata.
Asking $50 plus minimal sipping. https://cimg1.ibsrv.net/gimg/www.mia...0ed7358003.jpg https://cimg3.ibsrv.net/gimg/www.mia...ddf9879219.jpg https://cimg4.ibsrv.net/gimg/www.mia...7107508795.jpg |
All times are GMT -4. The time now is 07:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands