Firmware for 99NB MSLabs MS2 Enhanced
Do I need a specific version 3.4.2 firmware to reflash the above as the firmware is corrupt (V6 printed on the main PCB)
Or can I use the one here http://www.msextra.com/downloads/ I assume a flash as a Microsquirt module? Any other steps I need to take other than jumping the bootloader pins and disconnecting the coils? |
I think it depends on the vintage. Calling @Reverant for you.
|
Please email with your ECU's serial number.
|
Originally Posted by Reverant
(Post 1490852)
Please email with your ECU's serial number.
|
Pin 16 is SPAREADC, pin 17 is SPAREADC2.
|
Originally Posted by Reverant
(Post 1497307)
For support on MS Labs ECUs: Please email, be sure to include the unit's serial number and include a datalog and your current map. Please don't PM for support issues. |
All times are GMT -4. The time now is 12:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands