Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   MS Labs - Miata Accessories (https://www.miataturbo.net/ms-labs-miata-accessories-89/)
-   -   Ms2 basic 90-93 base maps (https://www.miataturbo.net/ms-labs-miata-accessories-89/ms2-basic-90-93-base-maps-97194/)

sember 06-13-2018 04:42 PM

Ms2 basic 90-93 base maps
 
Bought used MS2 Basic 90-93 unit and its been on naturally aspirated car and he didnt have any base maps to sent with it.
Ive contacted mslab / revenant ~2weeks ago with no answers. If anyone here have the base map for turbo setup, please let me know and il give you email where you can sent it :)
Need to get car running well enough to get it tuned in 2weeks or i need to go with my old gen1 ms -.-

concealer404 06-13-2018 04:44 PM

Just start with the map that's on it and change it to suit your car. If it's been on a car, it clearly works.

Nobody will be able to give you a base map for your car without knowing what your car is. Unlikely anyone would have anything that old/outdated either.

sember 06-14-2018 09:15 AM

ID rather start with the one that havent been modified, shouldnt be a problem since those units comes with base map that should get car started and be safe to start modifying from that point.. Atleast for me it wouldnt be toi big favor to ask that file if i had it, maybe you are different.

concealer404 06-14-2018 09:30 AM

Nope it's not a big deal to ask. :)

I'm just saying that that's an extremely old unit that i'm not sure is even supported anymore, and if anyone does come up with a base map, it's going to need to be altered a lot for your car anyways, since chances are there isn't a "turbo base map" out there that matches whatever setup you might have on whatever your car is running whatever motor.

ryansmoneypit 06-14-2018 09:41 AM

Any 'base map" you get, will need extensive work. They are intended to get the car started. If your current map will start the car, then your as good as any other map.

get the car to start, set timing, adjust fuel so it will idel ok (600-1500 rpm is fine for now)

then get in start a data log and drive for 10 mins. Use megaLog veiwer and VE analyze Live. in Live analyze, set the cell change to easy at first. let it work the tune. accept new tune. load into current fuel map in tuner studio.

repeat a few times, start setting cell change to hard, and it should be a pretty decent runner.

This is how I like to do it. bounce between TunerStudio and MegaLogVeiwer

sember 06-14-2018 12:53 PM


Originally Posted by ryansmoneypit (Post 1486504)
Any 'base map" you get, will need extensive work. They are intended to get the car started. If your current map will start the car, then your as good as any other map.

get the car to start, set timing, adjust fuel so it will idel ok (600-1500 rpm is fine for now)

then get in start a data log and drive for 10 mins. Use megaLog veiwer and VE analyze Live. in Live analyze, set the cell change to easy at first. let it work the tune. accept new tune. load into current fuel map in tuner studio.

repeat a few times, start setting cell change to hard, and it should be a pretty decent runner.

This is how I like to do it. bounce between TunerStudio and MegaLogVeiwer

Thats just the thing im going to do, and for that reason i would just want the original copy of revenants "suplied stock base map / settings" to be sure that theres nothing that have been modified to ruin it from the beginning. Im not confident enough to trust someone elses made settings / maps to turn on engine first time. As for revenants / mslab's suplied one im confident enough belive that its safe to start from it. I hope i made my point clear now, i know the basics when i started with mspnp gen1 just the same way im trying to do now. I know its old unit and thats why i tought to ask from here if someone still has that file on pc (me myself like to keep those in storage on external drive in example)

ryansmoneypit 06-14-2018 01:20 PM

You arent getting it. if the current map starts the car, its fine to use as a base map. it really is that simple. there isnt a setting in MS thats going to just explode your engine on start up. your being too concerned with something that should be a non issue.

so, the big question- Does the MS start your car?

sember 06-14-2018 01:59 PM


Originally Posted by ryansmoneypit (Post 1486551)
You arent getting it. if the current map starts the car, its fine to use as a base map. it really is that simple. there isnt a setting in MS thats going to just explode your engine on start up. your being too concerned with something that should be a non issue.

so, the big question- Does the MS start your car?

Havent tryed yet, but well i give it a try at weekend. Its true that im being too carefull for trying somthing new for me myself. Il just adjust sensors,injectors and check ignition table and try what it says.

ryansmoneypit 06-14-2018 04:56 PM

exactly. The only thing you might need to change is the O2 sensor (depending on brand), injector size and req fuel


All times are GMT -4. The time now is 07:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands