BRGSEinTX

Hi all...I was going through some posts after searching and I noticed DIY supplies the center pin connector with all MS purchases. Unfortunately for me I bought mine off of another member and it didn't come with mine.

I need to run the center connector for the power/ground for a few AEM gauges and thought this was the simplest way to do it instead of splicing factory wiring or tapping into the fuse box (though I do have an add-a-circuit just in case).

My question is, does anyone know where to get the center connectors for the MSPNP 9093 or is it only through DIY? For $20 I thought I'd at least try first.

I also need to find some connectors for the AFM for my IAT wires. I had a spare AFM that wasn't really functional so I bent off two male connectors and figured I can just solder those to the wires, and clip them into the connector as they'd normally connect.

I guess the main thing is Im not able to source the individual connectors for doing my own wiring. I know DIY has the IAT kit, but I don't need the sensor or the bung...just the little metal connectors.

Also if there is a DIY rep on here (the one I saw hasn't logged in since Oct-13, foul), if I were to buy the center connector would you be willing to toss in some of those AFM male connectors (the 3 pin set would work)?

Thanks and if anyone knows the model number of the connectors I can just go buy from a store Id be happy to go that route as well!

aidandj

iTrader: (5)

Center connector info:

Megasquirt 2 Harness Assembly - Miata Turbo FAQ

Braineack

iTrader: (62)

MSPNP 12 pin center connector DIYAutoTune.com