Tweak my MSQ
#1
Tweak my MSQ
Can anyone have a look at my log and see if they can suggest and tweaks please.
I'm getting a flat spot/kangaroo between 3.5 and 4.5k.
http://homepage.ntlworld.com/patrick...2015-03-09.msq
http://homepage.ntlworld.com/patrick...t/datalog2.xls
Thanks,
Pat...
I'm getting a flat spot/kangaroo between 3.5 and 4.5k.
http://homepage.ntlworld.com/patrick...2015-03-09.msq
http://homepage.ntlworld.com/patrick...t/datalog2.xls
Thanks,
Pat...
Last edited by Avoneer; 03-17-2009 at 05:38 PM.
#2
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
Can anyone have a look at my log and see if they can suggest and tweaks please.
I'm getting a flat spot/kangaroo between 3.5 and 4.5k.
http://homepage.ntlworld.com/patrick...2015-03-09.msq
http://homepage.ntlworld.com/patrick...t/datalog2.xls
Thanks,
Pat...
I'm getting a flat spot/kangaroo between 3.5 and 4.5k.
http://homepage.ntlworld.com/patrick...2015-03-09.msq
http://homepage.ntlworld.com/patrick...t/datalog2.xls
Thanks,
Pat...
I'm not sure your NB sensor is reading properly, they're not normally stable like yours is showing.
After analysing in MLV it's wanting to take LOTS of fuel out just to reach stoich, assuming that your NB sensor is reading right it seems like you're pouring that much fuel in it's struggling to ignite, I had the same issue myself when i first installed MS all those moons ago!
In short use MLV to analyse the log and accept and burn those changes back to your MS. The issue will either get worse or better, and from that you can work out whether your NB sensor is working properly, or whether you need to tune blind
Thread
Thread Starter
Forum
Replies
Last Post
hustler
MEGAsquirt
27
02-05-2008 02:01 PM