mazdasteve |
08-31-2014 09:39 PM |
megasquirt and aem
Hello all. I megasquirted my miata today, Woohooo for tunerstudio haha. I uploaded the basemap onto the controller and everything seems to be running well. Timing has been verified at 10 and after a few pulls using autotune the car feels very smooth. My only issue is no matter what I have tried my wideband wont communicate with the ecu. It was and is wired into my wiring harness and was sending a simulated narrowband to the stock ecu as per the "p04" setting. I tried to continue the narrowband signal to the ecu with no luck. I also tried to switch the aem to p00 and then calibrated it in as a custom linear wideband. neither option allowed the wideband to communicate with the ecu. Any suggestions would be greatly appreciated. Id really like to keep the wiring setup i have if that is a possibility as well. Thank you. the Ecu is a MSPNP2 v1.2 and the wideband is an AEM 30-4100.
|