MS Labs MS3 Basic to MSPNP Pro no start
#21
Elite Member
iTrader: (2)
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
Question: If your TPS sensor actually read 101.9, then doesn't that mean that you should recalibrate it to make sure that 0 is actually 0 and 100 is actually WOT?
I'm on 1.5.beta firmware, and I've had an issue with the battery light coming on as well. I think mine is an entirely different issue relating to idle though, so I won't discuss it further in this thread.
I'm on 1.5.beta firmware, and I've had an issue with the battery light coming on as well. I think mine is an entirely different issue relating to idle though, so I won't discuss it further in this thread.
#23
Your Basic MS3 version (V1.4) had the alternator control built-in, as the MS3 firmware didn't have alternator control function in the firmware back then. Units newer than V3.1 have MS3 firmware-controlled alternators. No other functions are controlled by built-in hardware (aside from the alternator and battery light).
Is there a menu that would allow me to set what voltage triggers the battery light?
What I was really getting at was is there anything else that's greyed out that might actually be working if certain parameters are met.
Thanks,