Use a PnP as a parallel ECU
10-31-2009, 04:41 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Spain
Posts: 73
Total Cats: 0
Use a PnP as a parallel ECU
Is it posible use the PnP as a parallel ECU?????
I have a lot of problems with my Idle Speed.
I canīt move it down from 1400 rpm.
I thought that i can use the OEM Ecu to the Idle control and the PNP for the rest of things.
Is it posible????
Thanks.
I have a lot of problems with my Idle Speed.
I canīt move it down from 1400 rpm.
I thought that i can use the OEM Ecu to the Idle control and the PNP for the rest of things.
Is it posible????
Thanks.
Reply
0
0
10-31-2009, 04:58 PM
#2
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
You probably could with enough work, but I'd rather fix the idle problem.
The idle problem is either
mechanical
tune related
If mechanical, then going to the stock computer for idle only does nothing to solve the problem.
If tune related, you can just fix the tune.
The idle problem is either
mechanical
tune related
If mechanical, then going to the stock computer for idle only does nothing to solve the problem.
If tune related, you can just fix the tune.
Reply
0
0
11-01-2009, 11:53 PM
#4
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,175
Total Cats: 1,129
Throw in the stock ecu and idle it, if it's fixed, that's one thing, but I'm betting it'll still be there.
I zip tied a fuel hose to my throttle cable which I later found out after removing and reinstalling the engine was pulling on it, giving me a high idle. That zip tie is no longer there.
I zip tied a fuel hose to my throttle cable which I later found out after removing and reinstalling the engine was pulling on it, giving me a high idle. That zip tie is no longer there.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM
