|
MSPNP2 Crank no start
I've been a Nissan tech for many years but new to a/m ECUs and tuning. Trying to dip my feet in with a MSPNP2 made by Greg Lee. I have a 91 with a 94 1.8 swapped in using Flying Miata's conversion kit. Running 1.8 injectors, headers, and some crappy intake tubing to my AFM. I've already tried Google and the search functions.
Installed MS2PNP, loaded base map that came with it, changed injector size, changed spark mode to 4G63, offset timing by 8 (I'm running at 14 degrees 91 octane), pulled ST Sign fuse. Car cranks but doesnt start. I tried leaving the offset timing at 0, tried leaving spark mode on wheel, tried jumping fuel pump to ground (thinking I possibly broke the fuel driver), tried manipulating throttle. Wired up my AEM Wideband but that didn't change anything. I plug stock ECU back in and car starts fine. Attached are my datalogs with and without FP jumped. Any help is appreciated. I think my next step is to set timing back to 10 degrees and check for spark. |
What exactly do you have? The MSPNP2 is specifically made by DIYAutoTune, but could have been potentially sold through Greg Lee. If this is a DIYPNP or some sort of home-built PNP setup, settings and advice may need to be different.
|
3 Attachment(s)
Originally Posted by MrAlchy
(Post 1378961)
I've been a Nissan tech for many years but new to a/m ECUs and tuning. Trying to dip my feet in with a MSPNP2 made by Greg Lee. I have a 91 with a 94 1.8 swapped in using Flying Miata's conversion kit. Running 1.8 injectors, headers, and some crappy intake tubing to my AFM. I've already tried Google and the search functions.
Installed MS2PNP, loaded base map that came with it, changed injector size, changed spark mode to 4G63, offset timing by 8 (I'm running at 14 degrees 91 octane), pulled ST Sign fuse. Car cranks but doesnt start. I tried leaving the offset timing at 0, tried leaving spark mode on wheel, tried jumping fuel pump to ground (thinking I possibly broke the fuel driver), tried manipulating throttle. Wired up my AEM Wideband but that didn't change anything. I plug stock ECU back in and car starts fine. Attached are my datalogs with and without FP jumped. Any help is appreciated. I think my next step is to set timing back to 10 degrees and check for spark.
Originally Posted by Matt Cramer
(Post 1379274)
What exactly do you have? The MSPNP2 is specifically made by DIYAutoTune, but could have been potentially sold through Greg Lee. If this is a DIYPNP or some sort of home-built PNP setup, settings and advice may need to be different.
I am going out of town for a couple days. I will open the box up to take pictures when I get back. I've attached 2 msl (one with my fuel pump jumped and one without) and my current tune |
| All times are GMT -4. The time now is 08:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands