Johnny Tater

I got my base map loaded on, the car drives fine but when i turn the a/c on at idle it wants to stall, i hear about a drop down menu for a/c but i cannot find it.. if anyone can help with this issue thanks for now I'm going to continue to do my research.

Stealth97

iTrader: (5)

There is no A/C menu for it on the first gen. On mine I had to set the idle for about 1100 RPM and tune closed loop once I got it stable there. Even then it wasnt perfect. It will help if you look at your RPM/KPA with A/C on, add a row for that in your ignition table and give it lots of timing. The problem is the A/C sucks a ton of torque, and at idle were not making very much. This makes it difficult to tune.

Good luck

hornetball

iTrader: (4)

For me, the only true solution was writing my own software to handle the torque.

https://www.miataturbo.net/megasquir...de-hack-73751/

Matt Cramer

Exactly what MSPNP revision is this? The final revision of the '94-'95 MSPNP incorporated an analog idle-up circuit similar to the one in the Gen 2 V1.2s.