Idle unstable, what to adjust?
#1
Idle unstable, what to adjust?
Hello,
Installed pnp to my '92 1.6 JRSC yesterday and we've been tuning the VE table pretty succesfully today. Sparksettings are like they were on basemap - no change there yet before dyno. Only problem at this stage is the idle that keeps wandering between 800 - 1200rpm cold and warm. Haven't touch those original Idle Control and Idle Control (closed loop settings). What should be checked or tuned next?
AFM is removed.
We are pretty lost with this idle at the moment.
Timo
Installed pnp to my '92 1.6 JRSC yesterday and we've been tuning the VE table pretty succesfully today. Sparksettings are like they were on basemap - no change there yet before dyno. Only problem at this stage is the idle that keeps wandering between 800 - 1200rpm cold and warm. Haven't touch those original Idle Control and Idle Control (closed loop settings). What should be checked or tuned next?
AFM is removed.
We are pretty lost with this idle at the moment.
Timo
#2
Hi Timo!
First thing to do - if you don't already have - get the hires code.
You will find lots of info by searching for "idle" "idle control", in this forum.
Look around a bit and you'll find :-)
Some usefull posts
https://www.miataturbo.net/forum/t37511/
https://www.miataturbo.net/forum/t34270/
Good luck!
Andreas
First thing to do - if you don't already have - get the hires code.
You will find lots of info by searching for "idle" "idle control", in this forum.
Look around a bit and you'll find :-)
Some usefull posts
https://www.miataturbo.net/forum/t37511/
https://www.miataturbo.net/forum/t34270/
Good luck!
Andreas
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM