|
VICS
According to the Megasquirt manual VICS is in the programable on/off out puts Injector I out. I was looking at it which drop down should be switched on or off in this screen. Attached is how I have it currently set.
https://cimg6.ibsrv.net/gimg/www.mia...61aa5808b6.png |
Those are the correct values for VICS, if you get the car on a dyno, you can verify by setting the rpm to 1000 and 10000, then set the rpm to where those two runs intersect, which is usually right around 5500. Do a 3rd run to verify it now follows the top of both test runs.
|
Originally Posted by curly
(Post 1607340)
Those are the correct values for VICS, if you get the car on a dyno, you can verify by setting the rpm to 1000 and 10000, then set the rpm to where those two runs intersect, which is usually right around 5500. Do a 3rd run to verify it now follows the top of both test runs.
Awesome thank you curly! |
| All times are GMT -4. The time now is 01:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands