Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Prefabbed Turbo Kits (https://www.miataturbo.net/prefabbed-turbo-kits-3/)
-   -   15 psi and EMU (https://www.miataturbo.net/prefabbed-turbo-kits-3/15-psi-emu-5643/)

Red Roadster 11-16-2006 06:54 AM

15 psi and EMU
 
hi i have a greddy at 10 psi with an AFPR , but i also have to fo the install a EMU and 460 injectors , my car already as the o2 clamp and lc1 wideband , i would like to know if i can push my turbo to 15 psi with only the 460 injectors or do i have to mantain the AFPR.

fmowry 11-16-2006 09:39 AM

460s and stock fuel pressure is enough fuel for 15 psi as long as the EMU has no problem controlling the 460s which it shouldn't.

I ran 15 psi on my T28 FMII for a year with 440s through the stock rail. I did eventually go with the Jim B dual feed rail but don't think it made much difference.

Frank

IntrnlStorm 11-16-2006 02:34 PM

I had the EMU on my '92 with NO AFPR or upgraded fuel pump. I was running about 14-15 psi with 550cc Injectors. The EMU can handle it... I'm not sure though if the 460 are enough? someone else may chime in and confirm them...

jayc72 11-16-2006 02:37 PM

460's would probably be good for 225-230whp.

Braineack 11-16-2006 03:44 PM

I'd estimate the same. So around the 15psi mark.

Red Roadster 11-16-2006 03:57 PM

ok you guys are saying 225 rwp , but there is a member in the forum that as 245 rwp with 1.8 injectors and EM and AFPR so lets say im trying to get 250 rwp , can the 460 inj be enough or do i need to retain my AFPR

jayc72 11-16-2006 04:36 PM

The reason he was able to get to 245whp using 1.8 injectors was because he was running more the 2X the fuel pressure! 250whp with 460cc injectors would probably require additional fuel pressure.

Jay


All times are GMT -4. The time now is 12:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands