BEGI-S IAT question
The elbow right before the throttle body has a 1/8 NPT bung. I assume it's for an IAT sensor. I was planning to use a 3/8 NPT GM sensor. Does anyone know of a 1/8 NPT IAT sensor that similar to the GM open element?
|
It's not. It's for the IAC (idle control valve) hose isn't it?
|
The one for the iac valve isnt threaded.
|
you could get an adapter....or stick some WI in there ;)
|
I have a 99 which doesn't have an idle control valve hose so I have no reference but that hose looks a lot bigger in pics.
|
I like the WI idea.
ZX-Tex just drilled and tapped the wall of the inlet tube. I may do that. I need to switch to an IC before next summer so it would be temporary anyway. |
Yup- the NA idle air bypass hose is appx. 1/2" ID or so (just eyeballing) and it's a slip-fit. Like Brainey said, a water-injection nozzle is about the only thing I can think of with a 1/8" NPT thread that you'd want to put in that location.
|
It should be a 3/8NPT. Shoot me an e-mail or PM, and we will get you the correct tube.
Stephanie |
Originally Posted by Stephanie Turner
(Post 314145)
It should be a 3/8NPT. Shoot me an e-mail or PM, and we will get you the correct tube.
Stephanie |
Looks like the Saturn Ion coolant sensor is 1/8" NPT but uses the same connector as the standard one. Useless for me but it might be useful info for someone doing a coolant reroute or some other cramped install.
AC Delco P/N 213953 Found it here: http://forums.vwvortex.com/zerothread?id=3407988&page=1 |
All times are GMT -4. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands