Bell kit
#41
Unfortunately, that does not take care of the turbo outlet tube clearing the hood, FMU leaking fuel at the seams at 45psi, FMU bracket does not fit FMU or turbo being bent to chit.
After tallying it all up, only pieces I could use out of the box are: hoses, fittings, fuel pressure gauge,boost pressure gauge, intake inlet tube, filter, couple brackets, manifold and the drill / tap.
So deep into this, ordering a MS plug and play, injectors and other little bits. Going to take my machinist a bit to fix all this anyway.
After tallying it all up, only pieces I could use out of the box are: hoses, fittings, fuel pressure gauge,boost pressure gauge, intake inlet tube, filter, couple brackets, manifold and the drill / tap.
So deep into this, ordering a MS plug and play, injectors and other little bits. Going to take my machinist a bit to fix all this anyway.
#43
Come on man, it's all clearly the installer's fault. Maybe the parts got damaged in transit. Somehow that ALWAYS happens to BEGi. Either they have Ace Ventura delivering their packages, or they only sell to imbeciles who can't install anything.
Now that I've expelled my share of sarcasm, I can tell you the following: Dont count on good customer service. At least don't count on it from BEGi. See, I couldn't even put those two in the same sentence.
Now that I've expelled my share of sarcasm, I can tell you the following: Dont count on good customer service. At least don't count on it from BEGi. See, I couldn't even put those two in the same sentence.
#44
I hate BEGi the more I hear about them. My shop's owner bought an alpha omega kit. Took them ONE YEAR to ship it to him. Yup, that's right. All the while giving him the run around. "It's going out later this month" "it's going out this week" "it's going out tomorrow (x15)"
I wonder how Corky feels about his business being run like this, surely he wouldn't be pleased. As a small business, their customers are their bread and butter, so if they continue down this path, I'm not sure the market will allow them to stay as other competitors (Trackspeed Engineering) are coming onto the scene.
I wonder how Corky feels about his business being run like this, surely he wouldn't be pleased. As a small business, their customers are their bread and butter, so if they continue down this path, I'm not sure the market will allow them to stay as other competitors (Trackspeed Engineering) are coming onto the scene.
#51
Is your downpipe in 2 pieces? You 'can' run a metal gasket but usually not used. I'd bolt the upper to the housing as snug as possible then slip in the bottom. Or if you're able too, just do the upper piece alone to see if it seals without the rest of the exhaust attached.
#52
Elite Member
iTrader: (1)
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,552
Total Cats: 196
I am amazed how calm you are with so many major issues; i personally would be furious, especially about the damaged turbo, garbage FMU, and warped DP flange.
with so many issues, i would honestly open a chargeback for the following reasons:
"Not as described items"
"defective items"
"damaged items"
These are the code words credit card disputes use. so tell them these reasons when calling.
Credit card disputes always side on the customers side, 99% chance you will get a full refund.
At the prices they charge the product needs to be issues free and correctly fitting. no excuses.
i say charge it back, send this **** back, and order the FM no electronics kit for probably about the same price, and it should ship much faster, come with an intercooler and actually fit.
with so many issues, i would honestly open a chargeback for the following reasons:
"Not as described items"
"defective items"
"damaged items"
These are the code words credit card disputes use. so tell them these reasons when calling.
Credit card disputes always side on the customers side, 99% chance you will get a full refund.
At the prices they charge the product needs to be issues free and correctly fitting. no excuses.
i say charge it back, send this **** back, and order the FM no electronics kit for probably about the same price, and it should ship much faster, come with an intercooler and actually fit.
#54
Current situation. 255lphHP fuel pump, new filter, light green top injectors(all new seals), and BEGI FMU (managed to get it to stop leaking). Best I can get the AFR down to is 14's at 6-7 psi. That is running 90-100psi fuel pressure. Runs a solid 14.2-14.9 at idle with 02 sensor plugged in, 10.1 with it unplugged. Iv'e read, read some more and can't find an idea of what is keeping my WOT AFR so high.
#55
Elite Member
iTrader: (1)
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,552
Total Cats: 196
I'm almost to that point although I've fixed most of the issues and trying to tune the car. To the point I just laugh when I find another inferior part.
Current situation. 255lphHP fuel pump, new filter, light green top injectors(all new seals), and BEGI FMU (managed to get it to stop leaking). Best I can get the AFR down to is 14's at 6-7 psi. That is running 90-100psi fuel pressure. Runs a solid 14.2-14.9 at idle with 02 sensor plugged in, 10.1 with it unplugged. Iv'e read, read some more and can't find an idea of what is keeping my WOT AFR so high.
Current situation. 255lphHP fuel pump, new filter, light green top injectors(all new seals), and BEGI FMU (managed to get it to stop leaking). Best I can get the AFR down to is 14's at 6-7 psi. That is running 90-100psi fuel pressure. Runs a solid 14.2-14.9 at idle with 02 sensor plugged in, 10.1 with it unplugged. Iv'e read, read some more and can't find an idea of what is keeping my WOT AFR so high.