found my boost leak
 

:vash:

may I ask what did this thing connect to?! it looks like a radiator hose...

lol. it's the iac hose

ahhh I see now, lol

fail

Not just a boost leak...but unfiltered intake as well

Atleast it didn't effect idle.

Destruct-o-cat.

https://www.miataturbo.net/forum/att...7-dscf1694.jpg

When you see it you'll shit bricks.

C

lol i didn't even notice that

We could use some more guys like you: GoArmy.com > Careers & Jobs > Imagery Analyst (35G)

and you when fail that school or the army decides your are suited elsewhere guess what you'll be doing? yup, infantry :jerkit:

but I did totally miss the cat...

lol I know I failed... because I forgot thats what it looks like!

Mine is stainless steel wrapped for some odd reason... I blame my highschool years.

here kitty kitty kitty...

some duct tape will fix that right up.

Used to have a Link?

huh? i've only had the emb and now ms...if that's what you're talking about

OK. Link's AIT runs wires through right there.

gotcha. yeah to be fair it's probably the only original piece of rubber under my hood with 49k miles and 16 years. it's actually split worse than the pic shows. i had to order it, coming in tuesday

yep if you dont have another hose handy you can just plug this for a while your cold idle will be shitty but atleast you will still run normal boost.

it's snowing anyway so the car will be sitting

So are you going to change your sig?

i guess next dyno day.

for now it would read "major boost leak due to iac hose on my coffee table"

i got an extra hose if you need it, PM me

thanks i appreciate the offer but i got a new one the way, should be here tuesday

where the hoes at?

haha get it hoes..... (cricket chirps) lol :facepalm:

comes off the botom of the tb and used to connect to the stock crossover on a NA its essentialy a tB bypass to help your cold idle.

lololololol lmfao he was being a smart ass lolol he wasn't asking where the HOSE is located lololololol hoes and hose two very different things, IE
hustler loves putting his hose inside aid invested hoes... lol lol

and here i thought we had a fellow dislexic :(

The VVT only operates on the intake cam. You can use any ECU you want and simply pin the cam halfway on it's range. The engine will run just like any non-VVT 1.8.

Good first post. Next time try to post on the correct thread.

No kidding but i hated that hose on my NA. It was a pain in the behind since all the ebay intakes dont have a plug for it and i really wasnt gonna pay 300 for an intake off another manufacturer.

I had a boost leak in the short vac line between the top and bottom halves of the NB intake manifold. Had to use compressed air and soapy water to find that bitch.