Found something inside my TD04
At the moment assembling my engine, and today i mounted the exhaust manifold and turbo. I had to measure the two holes the actuator can is mounted to, so I stuck a thin metal piece in there, just to measure. When i got to the end of the one hole it was something inside the turbo.
It was gray, and when i touched it it sounded like thin thin paper or leaves. Anyone ever experinced this? It`s supposed to be a new turbo. (I am sorry for the bad english, i`m from norway!) |
paint flake probably?
|
Either that or tumbling media or tapping residue. Blow it out or pick it out if it bothers you. Nothing to be concerned about.
|
sounds like somone got a dirty turbo ... clean?
|
4 Attachment(s)
Well.. I found it.
Attachment 216469 I did NOT put it in there. Well, problem solved. Here`s some pics of the engine, btw. Attachment 216470 Attachment 216471 I like to watch gauges! Attachment 216472 |
wow nice looking setup...wtf was in your turbo an aluminum foil turd?
|
looks like a packing peanut.
|
Originally Posted by MEatah15G
(Post 116114)
wow nice looking setup...wtf was in your turbo an aluminum foil turd?
Originally Posted by Braineack
(Post 116117)
looks like a packing peanut.
|
Where did you get the silicone heater hoses from?
Nice looking set-up BTW. |
The guy I bought my kit off packed the entire thing in packing peanuts with out taking the ends of the manifold, turbo or IC. I spend nearly as much time fishing out packing peanuts as I did installing the thing.
|
STBG, your english is fine, welcome to the forum. The packing peanut is pretty funny. It would seem that you are a fan of lightweight and fast cars... Elan?
|
When i bought my Nissan T25, it had a piece of foam shoved in the compressor outlet. You could barely see it and I took the compressor housing off to get it out, ended up being two pieces of it in there.
|
Originally Posted by MEatah15G
(Post 116114)
wow nice looking setup...wtf was in your turbo an aluminum foil turd?
|
Originally Posted by spike
(Post 116132)
Where did you get the silicone heater hoses from?
Nice looking set-up BTW. |
Originally Posted by samnavy
(Post 116237)
STBG, your english is fine, welcome to the forum. The packing peanut is pretty funny. It would seem that you are a fan of lightweight and fast cars... Elan?
Here`s the specs of the engine, stock bottom. SPECS: 550cc RC-Eng injectors Dualfeed fuel rai from FM 2,5" downpipe and exhaust RFL dumpvalve TurboXS High Performance boost controller Magnecor 8,5 Competition Spark Plug Cable Set Greddy manifold and Mitsubitshi Td04h-15g turbo ARP headbolts ACT Extreme organic clutch, rated for 277ft/lbs E-Manage Ultimate Innovate LC-1 wideband Whaddaya think? |
Originally Posted by SoonToBeGreddy
(Post 116981)
Thanks.. Theyre from mx5parts.com
|
All times are GMT -4. The time now is 06:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands