Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Prefabbed Turbo Kits (https://www.miataturbo.net/prefabbed-turbo-kits-3/)
-   -   Greddy kit ? (https://www.miataturbo.net/prefabbed-turbo-kits-3/greddy-kit-8574/)

NotYourAverage 03-29-2007 09:31 PM

Greddy kit ?
 
I will be installing my greddy kit very soon but i need to rebuild my vortech fmu first.
I currently have the 1.6 injectors in but will be purchasing the 1.8 injectors as soon as i can find a set of the 265cc ones.
no bipes as of yet but will be purchasing as soon as i can afford it
I found a good deal on the msd miata box and might pick that up
No intercooler as of yet - no money for one yet.

i want to run 7psi
1.8 injectors - what size fmu disk should i get ?

NotYourAverage 03-29-2007 09:32 PM

i'll be using the 1.6 injectors for the time being and lower the boost till i get the 1.8 injectors

boostinsteve 03-29-2007 10:15 PM

I run a 6:1 disk and it comes out real well. Just get the pack from vortech and change them out for what you need.

NotYourAverage 03-30-2007 03:46 PM

Well I Just Bought Some 1.8 Injectors And Should Have Them In A Wekk And I'm Ordering The 6:1 Recal Kit Too Hopefully Have It Up And Running In A Week

Sactown_NA 03-30-2007 04:32 PM

6:1 seems a little low even with 1.8 injectors.

I run RB20 injectors (270cc), a walbro 190lph HP fuel pump and an 8:1 disk.....works very well.

From what I have seen 8:1 seems to be what most people are running with 1.8 injectors FWIW.

Braineack 03-30-2007 04:48 PM

depends on turbo, injectors, boost level, power output.

a 6:1 at 7 psi of boost will put you at 92psi or so of fuel. Which is good for about 215BHp with 265cc injectors or 175-180rwhp.

a 8:1 at 7psi of boost will put you at 106psi of fuel. Which is good for about 230BHP with 265cc injectors or 190rwhp.

so if you are making more than 180rwhp at 7psi, then try the 7:1 or 8:1 disc as you are probably getting close to running lean, if not, then you'll have more fuel than you need.

Mach929 03-30-2007 05:39 PM

instead of fixing the vortec you could spring for a begi adjustable unit so you can better adjust your fuel pressures

boostinsteve 03-30-2007 05:58 PM

I am just giving mine as an example. I tune for a 12.5:1 afr. The 6:1 disk gives me a real good afr for a vast amount of the rpm range. I am also running WI, which allows me to run like this with no detonation in my opinion.

Mimime 03-30-2007 09:53 PM

I had 7:1 Disc, running 1.8 injectors and AFR was 10-11....

NotYourAverage 03-31-2007 01:16 PM

well i ordered the 6:1 disc already and im running the greddy turbo from the kit . well i guess ill see how it goes

boostinsteve 03-31-2007 01:21 PM

They sell a whole pack of the disks for just a little bit more money.

NotYourAverage 03-31-2007 02:17 PM

didn't know that the site i ordered from had them all seperate

NotYourAverage 03-31-2007 02:18 PM

ahh i found it its 56 for all , i bought the 6:1 kit for $6 :)

olderguy 03-31-2007 02:22 PM


Originally Posted by NotYourAverage (Post 97704)
ahh i found it its 56 for all , i bought the 6:1 kit for $6 :)

$6??? What is the site?

NotYourAverage 03-31-2007 06:05 PM

hehe called ebay - and i forgot to bid lol so i lost out it was a 6:1 kit for $1 and it sold at $1 w/ $3 to ship :(


All times are GMT -4. The time now is 02:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands