help me with 305 install please *pics*
 

hi, im installing 305cc injectors right now, got em in but it seems that the bracket that holds the fuel rail is a couple mm's off. *see pics* do i need to use the rubber grommit at the end of the 1.6 injectors that im pointing to in the pics? thanks for your help Attachment 217391
Attachment 217392

buy new ones. and new orings for the used injectors.

When I installed the 305's I installed those "spacers" at the bottom of the injector. They didn't seem to want to seal against the head without them.

Also you rail is probably just missing the "spacers" that go between the rail and the head.... they are for ever falling all over the place.....

Dave,

ohhhh yea i forgot about those spacers in the rail, i put them aside so i didnt lose them hahaha. but yea i think ill use the spacers off of the bottom of the 1.6 injectors also

I used the spacers on the injectors, otherwise you might get a vacuum leak.

and yeah you forgot to reinstall the fuel rail spacers!

Got a RX-7 "B" series AFM? Make sure you tighten the flapper do back up to lean it out a little. I had a 12.3:1 idle at 6 clicks looser. At OEM specs I had a 14.7:1 idle.

I'm telling you, buy a new seal set and throw away the old shitty ones.

Amen! I replaced my stock rail with a Vishnu and eventually (within a week!!) all the injector seals failed (one-by-one), dumping close to two tankfuls of gas on the ground within that week! :eek: