If you had $2k to spend on a Greddy Kit...
...what would you get?
And let's assume I have zero fabrication skills :D Cheers! |
Originally Posted by johnxsi
(Post 50567)
...what would you get?
And let's assume I have zero fabrication skills :D Cheers! or GReddy Kit 1100-1300 (where ya find it) New Bolts 20-30 Bipes 200ish Boost Gauge 40-60 New Fuel Pump 75 1.8L Injectors 50 Stripes Kit 550+30 for beads (worth it if you ever plan for big boost) 2000-2200 bucks FTW i wish I had gone that way |
Greddy Kit $1200
New Hardware, Tap Pan, Braided Return, Tbolt clamps $100 Used 1.8 injectors $50 255 HP pump $100 Wideband and boost gauge $300 Water Methanol Injection $200 New Plugs, Wires, Fuel Filter $50 $2000 for an easy and reliable 170-180 whp. |
I agree with LD, but I'm a po' cheap bastard so I'd modify it a little
USED GReddy Kit 700-1000 USED J I M B pipes w/BOV 250, or if you're lucky comes w/a guy parting out the GReddy USED 1.8L Injectors 50 USED boost gauge 20-40 USED eManage Blue 300 USED AFPR 150 New Heatshields 100 New Fuel Filter 60 New 1 step Colder plugs 15 New Return Line 30 New Bolts 20-30 Puts you at 1995 |
If you have $2k to spend, DIY is the way to go. Greddy will get you there, but it won't be as fun!
Zero fabrication skills are needed. The "need some skillz" stuff extends to tapping the oil pan for the turbo drain, and wiring in the Bipes to the factory ECU harness... but even those are about a 2 out of 10 on the difficult scale. However, don't forget that you're going to need a $300 clutch to hold any power. Here's what I've spent so far, the ONLY THING LEFT is at the bottom and it's included in my total. Date Item Price Seller 88 RX7 AFM 33.25 Pick'NPull Walbro 190hp 140.00 KFJ Begi T25 Manifold 266.00 Bell Engineering Begi FPR 150.00 P.O. Private Seller Intercooler 105.98 Ebay STBRacing 1.8 inj's / Saab BOV 65.00 Ssampson Ebay MBC 14.90 Ebay Voodoo Boost S.W. Boost Gauge 52.23 RacerPartsWholesale FP Gauge/Fittings 13.50 Hampton Rubber Supply Fuel/H2o Hosesfittings 45.23 Hampton Rubber Supply JB Weld / Brass T 8.93 Pep Boys Garrett T25 w/rebuild 140.00 Holeshot Racing/Craigslist 3" K&N Univ/Flange 42.21 Amazon / eBay 15ft 5/16 Siclicone 57.00 somewhere on eBay Bipes 175.00 MT.net classifieds 2gDSM T25 65.00 classified Begi DP -divorced wg 310.00 Bell Engineering 2nd 2g DSM T25 70.00 classified 3rd 2g DSM T25 40.00 classified 4xIC pipes and clamps 94.58 CX Racing- eBay Some Couplers/Pipe 62.00 LSD Motorsports Remaining Couplers 132.25 Kalidon- eBay Oil Feed Line/ Drain Flange 50.00 Turbo-Supply when I know length Total: 2133.06 You can definitely go cheaper... but every part here should last me the life of the car. I'm not afraid of anything I've bought failing or not working as advertised (even my $15 MBC). I also spent $170 extra on 3 turbos I won't use but will be able to resell the extra parts and recoup some money. I'll also be able to resell my stock fuel rail, fuel pump/assembly, and a few other things to end up with a final total expenditure of about $1800. This is $100 over my original budget. Not too bad. This amount of course does not include the Spec Stage II clutch and the half-dozen seals I'll replace while I've got the tranny off of about $400. It also doesn't cover a few hours on the dyno to tune, I've expect about $200 for that. Those suggestions above are just as good, all depends on what you can source used at the time you decide to start spending money! |
sigh only reason id go greddy is the carb sticker for CA :(
|
Fuck Jim's pipes I have been having NOTHING but trouble with those bastards go Stripes.
shit if someone would lend me the plastic crossover i'd sell me Sab 900 and pipes and BoV then go buy Stripes kit. |
hahaha. I've had minimal problems, and it's worked fine since i've ironed them all out.
|
Originally Posted by LunaticDriver
(Post 50597)
Fuck Jim's pipes I have been having NOTHING but trouble with those bastards go Stripes.
shit if someone would lend me the plastic crossover i'd sell me Sab 900 and pipes and BoV then go buy Stripes kit. if you need a crossover pipe I'm pretty sure I have two laying around. |
USED GReddy Kit ($800 [$1200 new])
USED 1.8L Injectors ($50) Boost Gauge ($50) Recalibration Disc ($25) Walbro 190HP Fuel Pump ($80) Stripes Intercooler Kit ($550) MBC ($20) Tony's DP ($225) Bolts/heatwrap ($50) Bipes ACU ($200) $2050 Have fun at 170rwhp |
Wow, I'd never thought that I'd say this, but.....one option is to save up the extra $700 bucks and get the cheapest BEGI kit for now...<ducks for cover>
FWIW, I am very happy with my GReddy + DIY upgrades, but the BEGI kits are awful tempting for bolt on and go power... For the extra $700, you get: 1) a much more responsive ball bearing turbo GT2554 that'll spool much earlier than the GReddy (try like 1k rpm sooner, if not more, if still using the stock GReddy DP and stock exhaust) 2) a much better flowing and sized DP 3) "easy" install with pictures/instructions/BEGI support that you can bolt on now instead of collecting all the pieces slowly over time DIY (granted you'll learn a hell of a lot more by doing it yourself, not trying to discourage this if you have the time and willing effort) Or if money is an issue, just get the GReddy kit now, retard your base timing to 6, install and enjoy 4.5 psi of boost until you figure the rest out. ~$1100 for an extra 30 or so hp NOW! Final thought is to factor in the cost of all the other "extras" for our older cars, I don't know how much milage you have, but I assume that your car is a 90-93 since you are asking about the GReddy kit so if it's a high milage car, you may need new plug wires ($40), a new clutch ($200+), etc... Those little things really add up over time. In fact, it's sometimes better to install and upgrade in stages so that it makes troubleshooting easier. Start with the base kit + maybe Tony's DP (so you wouldn't have to put on the Greddy DP just to replace it later) and go from there....ask people who have changed too much at once and try to track down a problem....it sucks... |
i would buy a stand alone ECU, then decide what direction i wanted to go for turbo.
|
Originally Posted by brgracer
(Post 50658)
In fact, it's sometimes better to install and upgrade in stages so that it makes troubleshooting easier. Start with the base kit + maybe Tony's DP (so you wouldn't have to put on the Greddy DP just to replace it later) and go from there....ask people who have changed too much at once and try to track down a problem....it sucks...
|
Originally Posted by brgracer
(Post 50658)
Wow, I'd never thought that I'd say this, but.....one option is to save up the extra $700 bucks and get the cheapest BEGI kit for now...<ducks for cover>
FWIW, I am very happy with my GReddy + DIY upgrades, but the BEGI kits are awful tempting for bolt on and go power... |
Originally Posted by johnxsi
(Post 50701)
That thought keeps crossing my mind... I start by thinking I'll just get the base GReddy and enjoy it, but to do things properly I should add Bipes/DP/IC/etc as well...suddenly I'm close to BEGi territory so I may as well save a bit more and buy that...then I'm spending $3k on a kit when I could get a good cheap turbo kit for only $1100 :D And round and round I go.
|
All times are GMT -4. The time now is 07:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands