Prefabbed Turbo Kits A place to discuss prefabricated turbo kits on the market

Greddy kit ?

Thread Tools
 
Search this Thread
 
Old 03-29-2007, 09:31 PM
  #1  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default Greddy kit ?

I will be installing my greddy kit very soon but i need to rebuild my vortech fmu first.
I currently have the 1.6 injectors in but will be purchasing the 1.8 injectors as soon as i can find a set of the 265cc ones.
no bipes as of yet but will be purchasing as soon as i can afford it
I found a good deal on the msd miata box and might pick that up
No intercooler as of yet - no money for one yet.

i want to run 7psi
1.8 injectors - what size fmu disk should i get ?
NotYourAverage is offline  
Old 03-29-2007, 09:32 PM
  #2  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default

i'll be using the 1.6 injectors for the time being and lower the boost till i get the 1.8 injectors
NotYourAverage is offline  
Old 03-29-2007, 10:15 PM
  #3  
Senior Member
 
boostinsteve's Avatar
 
Join Date: Oct 2006
Location: Honolulu, HI
Posts: 563
Total Cats: 0
Default

I run a 6:1 disk and it comes out real well. Just get the pack from vortech and change them out for what you need.
boostinsteve is offline  
Old 03-30-2007, 03:46 PM
  #4  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default

Well I Just Bought Some 1.8 Injectors And Should Have Them In A Wekk And I'm Ordering The 6:1 Recal Kit Too Hopefully Have It Up And Running In A Week
NotYourAverage is offline  
Old 03-30-2007, 04:32 PM
  #5  
Newb
 
Sactown_NA's Avatar
 
Join Date: Mar 2006
Location: Sacramento, CA
Posts: 44
Total Cats: 0
Default

6:1 seems a little low even with 1.8 injectors.

I run RB20 injectors (270cc), a walbro 190lph HP fuel pump and an 8:1 disk.....works very well.

From what I have seen 8:1 seems to be what most people are running with 1.8 injectors FWIW.
Sactown_NA is offline  
Old 03-30-2007, 04:48 PM
  #6  
Boost Czar
iTrader: (62)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
Default

depends on turbo, injectors, boost level, power output.

a 6:1 at 7 psi of boost will put you at 92psi or so of fuel. Which is good for about 215BHp with 265cc injectors or 175-180rwhp.

a 8:1 at 7psi of boost will put you at 106psi of fuel. Which is good for about 230BHP with 265cc injectors or 190rwhp.

so if you are making more than 180rwhp at 7psi, then try the 7:1 or 8:1 disc as you are probably getting close to running lean, if not, then you'll have more fuel than you need.
Braineack is offline  
Old 03-30-2007, 05:39 PM
  #7  
Elite Member
iTrader: (3)
 
Mach929's Avatar
 
Join Date: Oct 2004
Location: lansdale PA
Posts: 2,494
Total Cats: 0
Default

instead of fixing the vortec you could spring for a begi adjustable unit so you can better adjust your fuel pressures
Mach929 is offline  
Old 03-30-2007, 05:58 PM
  #8  
Senior Member
 
boostinsteve's Avatar
 
Join Date: Oct 2006
Location: Honolulu, HI
Posts: 563
Total Cats: 0
Default

I am just giving mine as an example. I tune for a 12.5:1 afr. The 6:1 disk gives me a real good afr for a vast amount of the rpm range. I am also running WI, which allows me to run like this with no detonation in my opinion.
boostinsteve is offline  
Old 03-30-2007, 09:53 PM
  #9  
Senior Member
iTrader: (1)
 
Mimime's Avatar
 
Join Date: Sep 2006
Location: Hong Kong
Posts: 523
Total Cats: 0
Default

I had 7:1 Disc, running 1.8 injectors and AFR was 10-11....
Mimime is offline  
Old 03-31-2007, 01:16 PM
  #10  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default

well i ordered the 6:1 disc already and im running the greddy turbo from the kit . well i guess ill see how it goes
NotYourAverage is offline  
Old 03-31-2007, 01:21 PM
  #11  
Senior Member
 
boostinsteve's Avatar
 
Join Date: Oct 2006
Location: Honolulu, HI
Posts: 563
Total Cats: 0
Default

They sell a whole pack of the disks for just a little bit more money.
boostinsteve is offline  
Old 03-31-2007, 02:17 PM
  #12  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default

didn't know that the site i ordered from had them all seperate
NotYourAverage is offline  
Old 03-31-2007, 02:18 PM
  #13  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default

ahh i found it its 56 for all , i bought the 6:1 kit for $6
NotYourAverage is offline  
Old 03-31-2007, 02:22 PM
  #14  
AFM Crusader
iTrader: (19)
 
olderguy's Avatar
 
Join Date: Oct 2004
Location: Wayne, NJ
Posts: 4,667
Total Cats: 337
Default

Originally Posted by NotYourAverage
ahh i found it its 56 for all , i bought the 6:1 kit for $6
$6??? What is the site?
olderguy is online now  
Old 03-31-2007, 06:05 PM
  #15  
Newb
Thread Starter
 
NotYourAverage's Avatar
 
Join Date: Mar 2007
Location: Albuquerque , Nm
Posts: 39
Total Cats: 0
Default

hehe called ebay - and i forgot to bid lol so i lost out it was a 6:1 kit for $1 and it sold at $1 w/ $3 to ship :(
NotYourAverage is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
JxPhan
Meet and Greet
3
10-02-2015 02:17 AM
lsc224
Miata parts for sale/trade
2
10-01-2015 09:17 AM
drumman83
Suspension, Brakes, Drivetrain
2
09-25-2015 07:03 PM



Quick Reply: Greddy kit ?



All times are GMT -4. The time now is 11:46 PM.