looking for a turbo manifold
 

hi im new to the forum im looking for a manifold with a t3 Flange. all i can find is t2 Flanges.

look more.

Step1: fill out signature.
Step2: fill out location in profile.
Step3: go to Meet&Greet forum and perform proper NOOB introduction.
Step4: if you have been looking on eBay, you fail.
Step5: any of the half-dozen or so primary Miata turbo manifold suppliers will make any of their products with any flange you desire. HINT**HINT** one of the guys on here who shall remain nameless but his initials are TurboTim might be somebody you wanted to PM about a T3 flanged manifold.

Any particular reason you need a T3 flange? What turbo are you planning on running? Tell us about your setup.

there is no setup........no brain cells either

I'll sell you my FM cast manifold. It'll work for a t3. You just need to buy a t25 to t3 adapter, and mount it backwards.

read OPs name.
clicked "back"

ftfy

i have a nissan turbo from a r33 sykline with a 10psi wastegate i just started buying parts for my setup i just have the turbo and piping i find the intercooler i want (http://www.treadstoneperformance.com...s++Intercooler) but i dont want a cast manifold they are junk lol

Junk in what way? Junk as in they fail, or junk as in they make less power (potentially) than a properly designed tube manifold?

From what I understand:

crappy ebay manifold <<<<<<<<<<<<<(times a bajillion) BEGI/FM cast manifold < BEGI S4 < Absurdflow

Am I about right guys?

Really? I had no idea, better tell the thousands of people that run them for years that they are junk.

Oh Shit, mine has nearly 100k miles on it! I better get rid of it soon before it stops working because it's junk.

REPEAT:
Step1: fill out signature.
Step2: fill out location in profile.
Step3: go to Meet&Greet forum and perform proper NOOB introduction.
Step4: if you have been looking on eBay, you fail.
Step5: any of the half-dozen or so primary Miata turbo manifold suppliers will make any of their products with any flange you desire. HINT**HINT** one of the guys on here who shall remain nameless but his initials are TurboTim might be somebody you wanted to PM about a T3 flanged manifold.

You are seriously misinformed if you think cast manifolds are junk in general.

Also, that IC is going to be damn tough to route piping for. You're going to be limited to an over-the-rad setup... and I think the inlet/outlets are too close together for the cutouts in the upper radiator support.

If only I didn't have this junk cast manifold, I could make enough power to have fun.

OMG I can't believe FM and BEGi have been flooding the market with junk cast manifolds for over 10 years now...

1. Cast manifolds aren't "junk". They will more than max out the potential of the stock engine.
2. Never ever ever EVER build a kit around a part that you already have.
3. What turbo is it? Don't say "r33 skyline" turbo, tell us what it is. We aren't going to look it up for you.
4. You do not need to waste that much on an intercooler. Get an ebay one like 99% of us are running.

Despite only having two posts, I have a sinking feeling that we have another "I AM JACK'S NA" here.

I added in Artech to your list.

Yep. I do appreciate Sam mentioning me however :)

Either you dont like jugs (impossible for a heterosexual male) or you dont like drifting :giggle:

I know jugdrift in person, his communication skills are obviously a lil lacking, as are mine.
What he wants to do is turbo his 1999 miata. He purchased a nissan turbo off a r33 like he said, his power goal for that turbo is about 265whp, which it should make at about 14 psi. He has already contacted DIY auto tune under my recommendation. His goal is to build a turbo kit that can support 400whp, when his tax return comes around next year the motor will be getting a build. I informed him that cast and log manifolds are probably not adequate for his future goals. Basically he is trying to turbo his car, and i am trying to encourage him to avoid parts that wont hold up or remain efficient int he long run.
What he needs is a custom t3 tubular manifold or something like an Absurdflow.

Talk to Abe at Artech about having a manifold and downpipe made. Just know that it will probably be a while before it is done. Abe generally stays pretty busy.

Good advice, but why didn't you go with Abe for your manifold?

Because, EAST COAST FOR LIFE MOTHAFUCKA.

Really I have met you and wanted an absurdflow manifold since before Abe got big. It was just a personal preference.

Just tell him you love him already. Don't beat around the bush:giggle:

In a week when we are both hopefully at the dyno day there will be some "beating" going on.:giggle::giggle:

Ew.

You forgot step 6 sam

Step6: KILL YOURSELF


Judge Drift, just buy my setup. Proven 400hp. Quick spool. I even have a full 3" exhaust that goes with it.

400 setup should be achievable with 14 psi no problemo. You're right on the cast manifold though, they are crap. They radiate tons of heat, they are heavy and they suck your power dry. I hit 350 whp just from switching from cast to tube. It's the only way to go. You might want to look up gauges for the setup too though. I saw some one made a whp gauge too thats very accurate.

Details on whp gauge please? I have a whp gauge but it is a fwd whp gauge unfortuantely.

+1 on whp gauge...

I have a JDM whp gauge, don't think it works for USDM.

Yeah sadly if you try to convert it it gets mixed up and it doesnt work properly:vash:

The whp gauges i've seen are sweet. More accurate than a dyno at times since elevation doesnt affect them..likewise with ambient temp. At last they come in 2 1/16" all the way up to 6" dash in the corner gauges. Some of the higher end ones tell you exactly when to shift for best acceleration to rip the pants of the mustang punks.

you guys really are a peculiar bunch.

Hey now slow, don't be snapping at us just because you don't keep up with the latest hottest technologies.

Make sure you are running watercooled TiAL fuel injectors.

Shangai

Dei ftw

Yeah, it works on kilometers. :facepalm:

I am about to throw the towel on this forum condoning suggestions of self destruction.

http://a3.l3-images.myspacecdn.com/i...b3811add/s.jpg

Attentively,

The future of this world

Don't let the door hit you on the way out.

Read OP's location...
Clicked "back"

Myspace?

I am sorry. I feel sad that you feel sad that I wasn't sad about being sad.

http://30.media.tumblr.com/tumblr_lj...coh8o1_500.jpg

http://i.ytimg.com/vi/0AL9-s8K9m8/0.jpg

Chill bro!

http://webservice.imagesauce.net/image/712472/400x.jpg