BEGi S1 first startup experience.
03-12-2008, 12:40 AM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
BEGi S1 first startup experience.
So, i got my s1 and 460cc injectors all installed and started the car up for the first time. It pretty much started right up after priming the oil pump. I didnt drive it because im having wideband problems but i have some guesses for that. It idled pretty well, albeit a little high around 1500rpm. Then i shut it down and checked for leaks, tightened a couple fittings, and started it again. This time, it had a very bad surge. The rpms would go up, then something that sounded like an intake backfire happenned and the rpms went down and the whole process started over again. Any ideas?
Last edited by wes65; 03-12-2008 at 12:59 AM.
Reply
0
0
03-12-2008, 12:58 AM
#3
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
http://www.facebook.com/album.php?ai...8&id=501671671
These are not up to date but they are all i have right now. I will take some finished pictures this weekend.
These are not up to date but they are all i have right now. I will take some finished pictures this weekend.
Reply
0
0
03-12-2008, 09:49 AM
#4
This is what happens when you dont change one thing at a time, then when you go to start your car you have to troubleshoot everything.
If this is the first time you are using the 460's then I bet it has to do with your VE Table, and WarmUp Enrichments. You said yourself your wideband isnt working, I bet its running crazy rich.
If this is the first time you are using the 460's then I bet it has to do with your VE Table, and WarmUp Enrichments. You said yourself your wideband isnt working, I bet its running crazy rich.
Reply
0
0
03-12-2008, 10:27 AM
#7
Senior Member
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Southern Indiana
Posts: 1,369
Total Cats: -1
yeah, i shouldve started it up once before putting the new injectors in. I guess i just didnt think about it. The S1 came before the 460's because the guy that i bought the 460's was a tool. Waiting for the 460's before starting the install really wasnt an option since it has taken me 4 weekends total to get from the first disassembly to the first startup and i really want to be ready for scca.
But yeah, the wideband will help me out, i should be able to get it going this weekend and see what is going on. Im still running the stock diyautotune mspnp ve table. From what ive heard, that is a little rich in idle for 460's.
But yeah, the wideband will help me out, i should be able to get it going this weekend and see what is going on. Im still running the stock diyautotune mspnp ve table. From what ive heard, that is a little rich in idle for 460's.
Reply
0
0
03-12-2008, 10:31 AM
#8
I'm Miserable!
iTrader: (1)
Join Date: Oct 2007
Location: Niagara Falls, On, CANADA
Posts: 979
Total Cats: 0
Mine does that when i first fire it up it goes to 2000rpm-1000rpm for about 30seconds then it idles fine after but the idle is at 1200rpm, to high, and i dont know how to tune **** lol. Would that be that my VE fuel tables are to high?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
