Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Prefabbed Turbo Kits (https://www.miataturbo.net/prefabbed-turbo-kits-3/)
-   -   NB extractor hood (https://www.miataturbo.net/prefabbed-turbo-kits-3/nb-extractor-hood-22031/)

SeanE 06-06-2008 01:51 PM

NB extractor hood
 
Well with my turbo kit installed along with a coolant reroute I may need some sort of extractor hood. The temps would climb in stop and go traffic here in South Florida. I remember seeing one for an NB on adrenaline racing's site a while ago made by Tuckin99 that looked nice. are there any other choices for the NB guys? BTW, I'm still using the stock radiator because I wasn't sure which aftermarket one would fit on my car with the turbo.

iamwutiam86 06-19-2008 02:45 PM

check out Autokonexion, they are currently making a NB extractor hood. it might be a little while before it goes into production though. they are a sponsor over at clubroadster.net.

spoolin2bars 06-19-2008 03:19 PM

you can use hood spacers to lift the hinge side of the hood. works on my car. at a stop light you can put your hand there and feel a ton of hot air coming out.

Rafa 06-19-2008 03:46 PM

Or, you can look for a thread started by M2CupCar on the subject. ;)

levnubhin 06-19-2008 08:32 PM

Sean, just get one of these= http://www.carbontrix.com/store/inde...products_id=91

The carbon fiber would look really good with your color.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

TonyV 06-19-2008 10:42 PM

hasn't lifting the hood been re-classified as a "no-no'?

Zabac 06-20-2008 10:13 AM

Yes Tony, hood lifting does nothing but excite 12 year old Japanese girls...and boys.

zarish 06-20-2008 10:41 AM

I think you should just remove the hood and go hood less. Should keep you really cool!

lol :giggle:

SeanE 07-04-2008 03:41 PM

I was able to pick up a mini cooper hood scoop off of ebay for $53 less the $10 ebay coupon I used as well. For all thos who have done the mod, how did you go about cutting the hood? Did anyone come up with a template to use to make sure you don't cut the hole in the hood too big? I was gonna take it to the body shop I go to to have them do it 'cause I'm concerned I'll mess up the hood by cutting too big of a hole.

medic4.life 07-16-2008 01:39 AM

with hood risers it helped me out on stop and go traffic. my car would overheat even after a flush, water pump replacement, replacing all the hoses, then replacing the radiator my problem still occured. It seem to act normal when i was on the highway but at stop go traffic i was overheating until i did the hood riser


All times are GMT -4. The time now is 12:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands