new guy
hows it going,
i drive a 90 na, was thinking going with a 1.8 swap until i found a greddy kit dirt cheap. So i decided to go ahead and boost it. The owner was parting out the car due to a rear end accident and didnt like the looks of how much damage the miata took. Then i went ahead and picked up the kit for now just piecing up my own ic kit. Heading to the junker for an intercooler from a mustang or volvo which ever i can find, then weld and bend my own pipes. Im also waiting for a repsonse from mazdaracing for their dp, if not try to work with the greddy by cutting the flange and build my own. I was noticing that it has the vortech fmu and was thinking about starting with a 5-6 psi then till end of the yr upgrade my fuel pump and injectors. But for the meantime will it be a direct bolt on and no tuning required? The owner told me that he never took the fmu apart so i guess it has its stock disk. Ive been looking into bipes so till payday ill be ordering one. Boost gauge ive picked one up from checkers. Just for now dont know whats the difference from an ordinary a/f ratio gauge than aem's eugo? Also the reason i ask about tuning is that where ever i go for tuning here at vegas, cost from 1500 to 2000 just to tune and use dyno and man hours as they all say. sorry for the long, post im still new to boosting and want to have more fun with my na. thanks for reading my post |
You won't get a downpipe from mazdaracing. Try Begi or Turbo Tony.
The Vortech FMU is good for 6 psi, no tuning required. Normal Narrowband AFR gauges are useless for tuning boost. Don't get one. Period. Welcome aboard! |
""intercooler from a mustang""??????
and what bryce said ps, this thread should be under the meet and greet area |
while you're at the junkyard you should pick up some rx7 rotors for your top end.
$1500 - $2000 to tune? You can't be serious. |
yea, my cousin just got his car tuned, very well i might add, 4 hours on the dyno, at 100 dollars an hour, = 400 dollars, plus the initial 65 for the dyno
so in total he paid 465, and the car pulls like a bitch if some one quoted u 1500 to 2000, kick them in the nutz |
""intercooler from a mustang""?????? and what bryce said ps, this thread should be under the meet and greet area while you're at the junkyard you should pick up some rx7 rotors for your top end. $1500 - $2000 to tune? You can't be serious. Cant you ruin the motor by running rich? |
I passed California Smog no problem with the stock Vortech. I was running rich for a while, but I put a 1 way check valve on my BOV and that solved that issue. FYI I have a Greddy with Bipes and Turbotony 2.5 dp with a custom 2.5" full exhaust, cat and all.
|
Is the wideband necessary, for the install of a basic greddy kit?
Or is it something that i can get later down the road? I wont be doing much, just be running greddy at base 5-6 psi till later on. I need to wait for my bipes, dont want to install the kit without bipes. |
You don't need a wideband for the base Greddy kit but later on when you up the boost I'd say it's pretty much required.
You can install the kit without the Bipes and retard your timing to 6 degrees easily. It will be sluggish when not in boost but it still works fine. |
If you get a Vortech disc set and install an 8:1, 6:1, or even a 4:1 with 305inj, you could get as much as 8-9 psi out of it. Having gone through that though, I wouldn't recommend it. You didn't mention what your power goals will eventually be or if you are eventually going with a full standalone, or some combination of band-aids. I imagine that your fuel management system will dtermine a lot of what your tuning cost will be.
If I were in Vegas and someone told me 1500-2000 for tuning without asking me what system I had, I'd think that they were hiring strippers to give me lap dances while the tuner dynos my car. |
my power power goal is 130 140, dont wanna push more till later on. Until i upgrade my rear end and purchase mspnp then ill be looking for more boost.
|
If your going to go the junkyard intercooler route, I have a full setup for sale. I'm flexible on price, I'm looking to get rid of it.
https://www.miataturbo.net/forum/sho...hlight=starion |
Is their a difference from a blow off valve or one way check valve?
What is preferred to purchase for the base kit? thanks If your going to go the junkyard intercooler route, I have a full setup for sale. I'm flexible on price, I'm looking to get rid of it. |
Good luck finding an SVO in a junkyard. Better off with eBay for that.
|
Originally Posted by ludecrasy87
(Post 242960)
Is their a difference from a blow off valve or one way check valve?
read through my FAQ linked in my sig, should clear up a few questions and start you in the right direction. |
Ok so if installing a BOV it cause richness between shifts and leaks at idle. Richness it is becuase the maf read a certain amount of air that went in the charge pipes, but not all goes to the throttle body due to some of it release through bov. So one thing to do is head into the HKS BOV SSQV right? to prevent leaks
but to prevent the richness you need to recycle the air. I noticed they have a bypass kit for the hks bov. If i have the bov and bypass installed would you still be able to hear the surge coming out of the BOV? Sorry for so many questions im learning more and more everyday. thanks Braineack for the sig, its helping me understand a bit more. |
you can still hear it, but its MUCH quieter. Im using a dsm bov thats recirced, its actualy kind of loud, but nothing compared to vta. I dont have any experience with this, if you go to your local junk, find a bosch bov, and recirc it, I bet it will be quiet as fuck.
also, my loud ass recirced bov makes less noise than my buddys supra with no bov. |
All times are GMT -4. The time now is 01:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands