OBDII with Turbo kits
So, its been a while since i initially looked at going FI on my 2001 miata, What all would be needed for me to pass OBDII,
My plans are to go FBO mods, with a turbo or SC kit. I know the FFP supercharger will pass OBDII with no issues, but i think i'd like to see bigger numbers than 200-240HP. We have no E85 around me so realistly with that kit i think i'll be getting 210 on a perfect day, so long story short, i'd prefer to get a turbo kit so i can see closer to 275-300 HP. It looks like my options are to go with a hydra to run all that, but in my state they are lame and require an OBDII computer inspection, so how do i get around that? On my 335i I can just flash back to stage 1, or 0, and use a thing that tricks the pc into thinking it still has a cat and that its perfect. But with the miata I have not seen any way to do something like this using a simple quick reflash to stock and most kits seem to use some aftermarket computer management system on the miata vs the stock one. |
JB4 miata
/ |
someone should make a search function on this forum, seems like it would help smart people like you out a lot...
|
That solution doesn't exist for the na or nb platform, our ecu doesn't allow it. Your best bet is to build a system where you can revert closer to a stock configuration and swap back in a stock ecu when it comes time to do emissions testing. It's really not all that much work to do every few years as needed. Swap the stock computer and injectors back in, wire open the wastegate, drive until your readiness monitors are set, and have the car tested... then swap the aftermarket ecu and injectors back in (I've simplified things a bit)
|
Originally Posted by airbrush1
(Post 1414457)
That solution doesn't exist for the na or nb platform, our ecu doesn't allow it. Your best bet is to build a system where you can revert closer to a stock configuration and swap back in a stock ecu when it comes time to do emissions testing. It's really not all that much work to do every few years as needed. Swap the stock computer and injectors back in, wire open the wastegate, drive until your readiness monitors are set, and have the car tested... then swap the aftermarket ecu and injectors back in (I've simplified things a bit)
|
Originally Posted by Forrest95M
(Post 1414380)
someone should make a search function on this forum, seems like it would help smart people like you out a lot...
|
All times are GMT -4. The time now is 04:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands