pinched oil feed, help?
So lesson learned: always ensure your oil feed line won't get caught between the downpipe and that sharp shelf running along the sides of the bay..
I know the archives touch on this, but some of the links are broken. I would like to put together a nice replacement feed line but not sure where to start. I'm thinking something with AN fittings, something classy. Maybe a little longer than the stock line, for routing purposes. TIA for any advice/hand holding. |
That sux. I built mine from McMaster Carr parts. They had everything I needed, but I can't find the actual order list. It was way back.
|
You need the block fitting, the feedline and the turbo fitting. All that info is in the FAQ though.
|
Would it be better to make a hard line?
|
www.paragonperformance.com
www.anplumbing.com www.summitracing.com I used those 3 to build my -3AN feed line. M10 at the block, 90 towards the front of the motor, 24" -3AN line, 90 to the turbo, then a -3AN to 7/16-24. |
anplumbing has everything you need for your feed setup. I ordered a 1.6 setup for a friend, it was like $45 after the $9 shipping. Including everything.
No it would not be better to make a hardline. |
Thanks all, I'm going to order when I get home. :) Gonna try your route sav. Did you feel 2' was enough length?
Originally Posted by cjernigan
(Post 197571)
the FAQ
|
Originally Posted by m2cupcar
(Post 197493)
That sux..
|
Originally Posted by Savington
(Post 197616)
...then a -3AN to 7/16-24.
Also, what sort of things are people using for a restrictor? |
3an line, with a banjo at each end, and a banjo bolt going into the block has worked fine for me.
|
Originally Posted by kotomile
(Post 198091)
what sort of things are people using for a restrictor?
|
Originally Posted by kotomile
(Post 198422)
???
|
ahh, didn't catch that. What size banjos then, if I were to go that route?
|
Originally Posted by kotomile
(Post 198481)
ahh, didn't catch that. What size banjos then, if I were to go that route?
|
cool, I actually just noticed that the route in the archives is all banjo based, and made my order. Cheers!
|
All times are GMT -4. The time now is 05:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands