Exhondaman

So I installed my 1980's HKS timer following instructions in my previous post (thanks Spike) as well as some searching. Here's what I did:

Edit: Actually, I wired it differently from what Spike posted, here's what he said:

And here the wiring I used:

https://www.miataturbo.net/forums/sh...o+timer+wiring


Timer Blue to harness black/red stripe

Timer Green to harness blue

Timer red to harness white.

Ground to hole on steering column (checked the ground it was good)

Started car, turned it off, car turned off :(

I noticed there's 2 all white wires, did I tap the wrong one? Thoughts?

*edit* I tried the other white wire also, no dice. And according to the above link, one of the white wires has blue diamonds on it?? I didnt see any. But regardless, timer powers on, but its still letting the car shut-off right away.

Exhondaman

Unless i'm reading it wrong, Spike's wiring doesn't seem to jive with the other one. Which one is right??

Exhondaman

Anyone? Help a brother out! It's my only day off this week and i want to get this sucker in.

spike

I got the diagram from another member that wired up his turbo timer using those instructions.Those instructions worked for the Greddy,HKS & Blitz timers.

I guess your older turbo timer is different from the new models.

Exhondaman

Spike, what do you mean by "1g1 and 1g2"?

I actually haven't tried your method yet but going to once I figure everything out.

Correct me if I'm wrong.

Timer red to harness white

Timer blue to harness black/white

Timer green spliced to harness blue AND black/red?

I found this searching around:


There's only three wires from MY timer though No yellow.

spike

1g1=ignition 1

1g2=ignition 2

green to 1g1(no need to splice green and 1g1 & 1g2 together).

On the M1 miata's we do not need the 1g2.

Exhondaman

Nice dice, looks like my old timer died. Off to the HKS museum it goes. Thanks for your help anyways.

Braineack

iTrader: (62)

you dont need one anyways

spike

^how did it die?

Exhondaman

Yeah, but it came with the used greddy kit, so id figured it'd tried to make it work. It powers on, but when I shut car off, it doesnt do it's job. Oh well, time to sit in my car with it running, looking like a drug dealer or child molester.

Braineack

iTrader: (62)

turn the car off and walk away and you can look like a normal person (if possible, i dunno never seen your face)

miataspeed1point6

iTrader: (1)

Just don't beat on it for a while when your ready to shut it off. When I get home I just pop the hood and then in the morning when I'm leaving for school or work I just push it down. I just feel bad leaving all that heat just sitting there.

Exhondaman

I just rechecked some of the online install info and most call for the unit to spliced into the e-brake wire, so the car shuts down if the e-brake is released. Since I stripped my interior and got rid of the brake idiot light wire, do u think that could be an issue? It does have a grey wire coming out of timer. Thoughts?

cjernigan

iTrader: (13)

Why waste your time messing with it?

Exhondaman

Cause it's free and already hard-wired it up, I want to exhaust all resources before I rip it out.

miataspeed1point6

iTrader: (1)

That could cause it to not function. It's like the auto starts where if you touch the brakes they shut off. I would imagine you need to connect that to make it work. I'm sure you could easily rig something up. Good luck, free stuff is fun to hook up.

cyee

connect that wire to ground and see if it works.