turbo to downpipe gasket
On da greddy turbo setup is the exhaust gasket between the turbo and the downpipe the same as stock? If not where would i go to get a replacement for this gasket mine is in two pieces. :confused:
|
if your mating surfaces are flat, you won't need a gasket.
|
your options are limited . you can get one from greddy, you can buy a used one or not use one at all.
|
hey tony you're the guy who makes the custom dp's right? do you have an email or aim acct that i could talk to you about a dp per chance
|
yes thats me ,my e-mail is turbotony2k@yahoo.com
|
Another option is to go to NAPA or your local autoparts store and pick up a blank sheet and cut your own.
|
Originally Posted by Pop VII
(Post 36508)
Another option is to go to NAPA or your local autoparts store and pick up a blank sheet and cut your own.
|
Copper flashing works as well... You can buy a 1' x1' section at the lumber yard.
|
use a coke can. but in all seriousness, you really don't need one.
|
All times are GMT -4. The time now is 04:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands