Diameter of oil return and compressor outlet?
#1
Boost Pope
Thread Starter
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
Diameter of oil return and compressor outlet?
I'm starting into the prep work for a Greddy install, and I need to verify a few things.
First, the manual which is posted in the Greddy Archives section indicates the supplied oil return hose as 19mm, which is 3/4". Is this correct with regard to the oil outlet of the turbo? I was expecting a 5/8" line, based on reading up on the "other" 1.6 turbo kit. I'm thinking about tapping the pan while I've got the steering rack out of the car, and I need to know what size fitting to install.
Secondly, anybody happen to know the outside diameter of the compressor outlet? Can't find any data on this one at all.
First, the manual which is posted in the Greddy Archives section indicates the supplied oil return hose as 19mm, which is 3/4". Is this correct with regard to the oil outlet of the turbo? I was expecting a 5/8" line, based on reading up on the "other" 1.6 turbo kit. I'm thinking about tapping the pan while I've got the steering rack out of the car, and I need to know what size fitting to install.
Secondly, anybody happen to know the outside diameter of the compressor outlet? Can't find any data on this one at all.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM