wastegate control
Hey guys I'm sure this has been covered before, but I haven't been here in quite a while. I know there are problems with the canister for the wastegate on the greddy turbo. What do you guys replace it with that is more reliable and a somewhat easy swap? Mine is continuing to develop boost spike and some boost creep. Thanks for any info you guys can give.
|
I don't believe I've heard of the Greddy guys replaced their wastegate actuators very often. What boost target are you shooting for?
|
it's been covered that they suck....but i dunno if anyone has gone as far as replacing them.
the main thing it they cant hold the boost, a helper spring usually "cures" the problem. |
are there any alternatives to the greddy supplied one?
|
Want to run 14psi without the spikes.
|
i'd love to run 6 without the spikes, but we cant have everything...
|
SEARCH "HELPER SPRING" it wont cure it but it will surely help.
|
Try getting one off a DSM and making it fit. You can cut the rod, bend it if needed, and tap the new ends and use a joiner. I'm surprised someone hasn't done this already. DSM spring on a 1G is about 7psi and they hold 20+psi with a boost controller.
|
All times are GMT -4. The time now is 10:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands