Anyone here running an aluminum muffler?
:idea:
|
Tying it to aluminum exhaust tubing?
|
Titanium is pretty common in some tuner circles for the entire exhaust system.
|
I remember Markp toyed with a 3" aluminum exhaust. his like ~4yo son could hold up an entire dp to muffler midpipe.
|
Did Leafy make himself an aluminum muffler or was that just the perforated core that was aluminum? I can't find the thread now.
|
I've made a few now. Ama.
|
Originally Posted by nitrodann
(Post 1225316)
I've made a few now. Ama.
It it like, light and stuff? |
Yep, you can put a whole system on your head and balance it like a circus act just for fun.
Dann |
I'm running a full 3" exhaust pipe made out of Ally. I used to run a straight through perforated ally muffler I purchased from Summit Racing for $90 but I blew all the stuffing out on my third event. The car sounded great and the entire exhaust was so light.
After that I switched to a SS muffler and after five events that one broke all the internal welds inside and the end plates started rattling around. I have just installed a magnaflow now which so far is holding up fine and looks better made than the previous one so hopefully it will last. My exhaust pulses at idle are extremely violent, if you hold your hand near the exhaust outlet it feels as though someone is slapping your hand and it actually stings. I think this combined with the exhaust temp destroys mufflers. I'm thinking of making my own ally muffler, with steel wool packing around the perforations then rock wool outside. I think it would be fine then. Someone else needs to try the Vibrant muffler from Summit and report back if it's ok. I think on a more stock MX5 it would be fine. |
The last 24" of my exhaust is aluminum tubing, replacing a straight-through muffler that I used to have there in the interest of saving weight.
Exhaust spits flames on the track and the aluminum is still holding up so chalk one up for the aluminum. But, do note that it expands and contacts severely during a heat cycle, even for a straight section of tubing. I could see an aluminum muffler cracking in a short time. -Ryan |
I've been using the vibrant with no issues so far, only been a few months though and only used at the extreme rear.
|
Originally Posted by nitrodann
(Post 1225316)
I've made a few now. Ama.
|
Tony abbott. Professional hektik ----.
|
Softcocks who blocked the word ----..?
|
Originally Posted by shuiend
(Post 1225423)
Who is your daddy and what does he do?
|
Originally Posted by nitrodann
(Post 1225411)
I've been using the vibrant with no issues so far, only been a few months though and only used at the extreme rear.
|
Awesome!! Can't believe I got this much of a buzz in a short period of time. Anyone have any sound bites? I'm looking to do strait (currently in place) to the rear axle then alunimun to the vibrant aluminum muffler. I'm n/a so it will be mega loud? I run a shitty $25 walker muffler but now I've had to reweld it 3 times i'm over it.
Thanks!! |
My car is n/a and loud... 2.5" header pipe into a 3" flex then ally all the way straight back. 14" magnaflow at the end with a small downturn. With the Vibrant it was louder again by 25%.
Whilst the tone is great, it would be only just ok for the road and would attract a lot of attention. You'd need the largest magnaflow. On the track, everyone comments how nice it sounds. |
3 Attachment(s)
Mod Edit: You embed Vimeo video by clicking this button: https://www.miataturbo.net/attachmen...1&d=1429807774 and then entering just the number of the video. You wind up with this: Attachment 233394 |
no effing idea how to imbed the video [vimeo=125799033][/vimeo]
|
Originally Posted by sharkythesharkdogg
(Post 1225439)
Great, now this is stuck in my head all day.
|
Yes, I built one for a local CSP car. That included building mufflers with aluminum cores and such. The vibrant mufflers are all too small so they're all mega fucking loud. The one I built used two 8" diameter mufflers one 12" long and the other 24". She's nice and quiet and only like 12ish pounds from the cat flange back including hangers. I had also built a mid pipe muffler for the car but it really didnt contribute like any additional muffling and it broke a few times from the exhaust vibrating back and forth + the extra heat of being so close to the motor.
|
ttt
|
Silence = No. Nobody runs one.
Except that one guy who sold his in the classifieds a few days ago. Thread closed so you don't bump it again pointlessly. |
All times are GMT -4. The time now is 09:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands