First track day? Read this...
#42
The corrosive dust is iron. ALL race pads have a high iron content. A rotor will expel iron dust too. Iron rusts when wet. So if your running race pads wash the dust off if you get cought in the rain. Or just run black wheels and don't care.
Last edited by OGRacing; 04-26-2016 at 06:15 PM.
#43
some beginners have extra brake zones. Ive seen plently of guys brake where i am flat.
More experenced drivers will take a hypotetical turn at 80 and a beginner will take it at 40 so its a 100-80 vs a 80-40 stop. Trust me the higest rotor temp i ever recorded was from a first timer.1600* in the pits.
What would turn away an instructor besides seats/harnesses? And yeah I found myself dragging the pedal a bit more than I should have in the beginning of the day. After a few sessions I realized my brake zones could be smaller and I could be much harder on the brakes. Also, my buddy told me Hawks HPS pads can hurt the paint on your wheels, is this true?
Last edited by OGRacing; 04-26-2016 at 06:25 PM.
#45
I advise them to follow the Nasa CCR. oem equipment isn't the best but there is noting you can do about it when working with drivers that have brand new bmw m3's for example. I advise instructors to walk if; they see a 4 point harness, the harnesses are not properly mounted, if the seat is aluminum (non-fia seat) and it's not braced, if the seat is missing bolts, if they see any tears in the equipment, and general things that involve poorly mounted or cared for equipment. i also advise them to ask how much pressure is in the tires. you would be surprised the answers we get to that one.
LOL wow that sounds like a death trap.
#46
"48psi. Steering feel is awesome!, but yeah, it's pushing a lot, the tires are kind of old though."
"Wait, 48psi hot? That's definitely too high. How old are the tires?"
"Um, I put them to 48psi this morning, it's what the sidewall says. Do they change as the day goes on? And well, the Corvette is an 05, so yeah, 11 years old. But only 11k miles on these puppies."
Some form of this conversation happens about once a year with someone on track. We usually try to catch it in tech with the newbs, and I think they've been good about mentioning this stuff in classroom, first session, etc. But there's still that one guy. Hell, we had an HPDE 1 dude insist he be in the racer's meeting last weekend because he drives a... yep.... corvette. (disclosure, I ******* love vettes, my brother has a Z06 as his main track car and he's a great driver/instructor, but damn, too many 50 year old wannabes).
#47
I almost clobbered a Daytona prototype @ Daytona in the kink. Guy just bought the car. passed me like a champ on the outside of the first horseshoe. after that i thought he could drive, so i hung with him. heading into the kink he brakes hard, i'm normally flat so that was unexpected. i almost messed up 10G worth of carbon fiber with my plastic bumper.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#48
"You're car is really pushing a lot in these turns, what pressure are you running?"
"48psi. Steering feel is awesome!, but yeah, it's pushing a lot, the tires are kind of old though."
"Wait, 48psi hot? That's definitely too high. How old are the tires?"
"Um, I put them to 48psi this morning, it's what the sidewall says. Do they change as the day goes on? And well, the Corvette is an 05, so yeah, 11 years old. But only 11k miles on these puppies."
Some form of this conversation happens about once a year with someone on track. We usually try to catch it in tech with the newbs, and I think they've been good about mentioning this stuff in classroom, first session, etc. But there's still that one guy. Hell, we had an HPDE 1 dude insist he be in the racer's meeting last weekend because he drives a... yep.... corvette. (disclosure, I ******* love vettes, my brother has a Z06 as his main track car and he's a great driver/instructor, but damn, too many 50 year old wannabes).
"48psi. Steering feel is awesome!, but yeah, it's pushing a lot, the tires are kind of old though."
"Wait, 48psi hot? That's definitely too high. How old are the tires?"
"Um, I put them to 48psi this morning, it's what the sidewall says. Do they change as the day goes on? And well, the Corvette is an 05, so yeah, 11 years old. But only 11k miles on these puppies."
Some form of this conversation happens about once a year with someone on track. We usually try to catch it in tech with the newbs, and I think they've been good about mentioning this stuff in classroom, first session, etc. But there's still that one guy. Hell, we had an HPDE 1 dude insist he be in the racer's meeting last weekend because he drives a... yep.... corvette. (disclosure, I ******* love vettes, my brother has a Z06 as his main track car and he's a great driver/instructor, but damn, too many 50 year old wannabes).
12 was probably the worst. a good friend was worried and said his car's handling was unpredictable. i took out the tire gauge to find out that he had 12 psi in his passenger side rear tire. the rest where around 21-28psi hot. It's stupid but something beginners easily overlook.
I almost clobbered a Daytona prototype @ Daytona in the kink. Guy just bought the car. passed me like a champ on the outside of the first horseshoe. after that i thought he could drive, so i hung with him. heading into the kink he brakes hard, i'm normally flat so that was unexpected. i almost messed up 10G worth of carbon fiber with my plastic bumper.
I almost clobbered a Daytona prototype @ Daytona in the kink. Guy just bought the car. passed me like a champ on the outside of the first horseshoe. after that i thought he could drive, so i hung with him. heading into the kink he brakes hard, i'm normally flat so that was unexpected. i almost messed up 10G worth of carbon fiber with my plastic bumper.
#49
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,652
Total Cats: 3,011
I had 2 Korean college students, one with poor English and one with very poor English at my last event. The weather was threatening to rain and a handful of instructors didn't show up so they were both assigned to me. Sigh. The one with poor English and 3 trackdays under his belt was supposed to follow me and the zero trackdays guy who didn't understand my words around Sebring. That's 17 turns to learn, folks, and some of them need serious braking or you just aren't going to make it through them. They were both new to the track and at some point in the day I was supposed to switch and ride with the more experienced guy, but nope. The newbie was so frighteningly inconsistent I couldn't leave him alone. Braking early sometimes and then very late sometimes, closing on cars that were beginning to brake because he wasn't applying enough pedal force even though last time through the same zone he over braked (broke?). I was a wreck trying to keep us from having one. Brake, Brake, BRAKE, MOAR BRAKE! I was hoarse even though I had an intercom.
#50
It appeared that everyone took home a story from that guy. When i got to an event #1 i try to prepare the car as much as i can before i head to the track. #2 i try not to be "that guy". lots of point by's, giving of extra room. I race TT so sometimes staying to close can screw your lap, sometimes the draft, or following a faster car helps.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#51
https://www.blipshift.com/products/H...m_campaign=new
#52
I had 2 Korean college students, one with poor English and one with very poor English at my last event. The weather was threatening to rain and a handful of instructors didn't show up so they were both assigned to me. Sigh. The one with poor English and 3 trackdays under his belt was supposed to follow me and the zero trackdays guy who didn't understand my words around Sebring. That's 17 turns to learn, folks, and some of them need serious braking or you just aren't going to make it through them. They were both new to the track and at some point in the day I was supposed to switch and ride with the more experienced guy, but nope. The newbie was so frighteningly inconsistent I couldn't leave him alone. Braking early sometimes and then very late sometimes, closing on cars that were beginning to brake because he wasn't applying enough pedal force even though last time through the same zone he over braked (broke?). I was a wreck trying to keep us from having one. Brake, Brake, BRAKE, MOAR BRAKE! I was hoarse even though I had an intercom.
i wouldn't have gotten into that car. if a student cant understand what i'm saying, i'm not going to risk my butt to try to teach him. he really needs a bilingual instructor, if the organisation doesn't have one tough cookies.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#53
I had 2 Korean college students, one with poor English and one with very poor English at my last event. The weather was threatening to rain and a handful of instructors didn't show up so they were both assigned to me. Sigh. The one with poor English and 3 trackdays under his belt was supposed to follow me and the zero trackdays guy who didn't understand my words around Sebring. That's 17 turns to learn, folks, and some of them need serious braking or you just aren't going to make it through them. They were both new to the track and at some point in the day I was supposed to switch and ride with the more experienced guy, but nope. The newbie was so frighteningly inconsistent I couldn't leave him alone. Braking early sometimes and then very late sometimes, closing on cars that were beginning to brake because he wasn't applying enough pedal force even though last time through the same zone he over braked (broke?). I was a wreck trying to keep us from having one. Brake, Brake, BRAKE, MOAR BRAKE! I was hoarse even though I had an intercom.
It appeared that everyone took home a story from that guy. When i got to an event #1 i try to prepare the car as much as i can before i head to the track. #2 i try not to be "that guy". lots of point by's, giving of extra room. I race TT so sometimes staying to close can screw your lap, sometimes the draft, or following a faster car helps.
100% agree with this.
#55
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,652
Total Cats: 3,011
But yeah, a Viper wouldn't make it out of the wet grass in the paddock area faster than you could walk.
#57
Had a local guy trash his 2015 viper when a wheel broke at Savannah. I grabbed him after the crash and checked his gear. he said "i already have another on on the way". that guy can afford to race vipers. :P
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#60
For those who want to learn the craft, just make sure the car is well maintained with good street tires, fresh brake pads, fresh brake fluid. spend the money on track time not mods, especially not on big brakes! in my opinion, brakes are the best way to retard ones learning curve. Decent rotors, stock or performance street pads, and fresh fluid. beyond that you are only slowing your progression. Managing brake fade is a slippery slope, but in my opinion it can help force drivers to not over brake and learn momentum.
If you intend this to be your hobby embrace the process, spend the money on track days, mods are secondary to maintenance and consumables. Don't mod the hell out of a car only to realize you cant afford to put tires and brakes on it. I've had many friends get into track days and quickly washout and quit due to skyrocketing costs. talk to people who've been tracking for 20 years. they either have **** you money or they've figured out a way to manage both car development and consumables responsibly.
My advise is to get several seasons of 5 or 10 track days each in a slow car under your belt so you understand how to manage and budget consumables and mods. you'll get way more out of driving a slow car fast then a fast car slow. get on track and prioritize changes based on your budget. don't make the mistake of blowing a bunch of money on the car before ever going on track. Sounds pretty lame I know but considering what is spent on track cars, the wash our rate is unbelievable. Your track car project will never be done, please don't try to tell yourself only xyz parts are needed. Please don't get a fancy paint job! for some reason new paint is a tire wall magnet!
If you intend this to be your hobby embrace the process, spend the money on track days, mods are secondary to maintenance and consumables. Don't mod the hell out of a car only to realize you cant afford to put tires and brakes on it. I've had many friends get into track days and quickly washout and quit due to skyrocketing costs. talk to people who've been tracking for 20 years. they either have **** you money or they've figured out a way to manage both car development and consumables responsibly.
My advise is to get several seasons of 5 or 10 track days each in a slow car under your belt so you understand how to manage and budget consumables and mods. you'll get way more out of driving a slow car fast then a fast car slow. get on track and prioritize changes based on your budget. don't make the mistake of blowing a bunch of money on the car before ever going on track. Sounds pretty lame I know but considering what is spent on track cars, the wash our rate is unbelievable. Your track car project will never be done, please don't try to tell yourself only xyz parts are needed. Please don't get a fancy paint job! for some reason new paint is a tire wall magnet!
Last edited by psreynol; 08-08-2018 at 12:11 AM.