Kimba

Everyone please note that my first post is not a question. I uploaded some photos of my Delrin install in the rear lower outers and rear upper inners to:

https://halethorpephotography.smugmu...lrin-bushings/

I used a socket wrapped with sandpaper to size the inner bores. It went pretty well. Aw who am I kidding. It was slow going and I sanded my fingers and got a blister on my thumb. And when I thought I was done, the long bolt was binding up. But it finally came together and everything fits snugly and is free.

Now on to the fronts. I have the offset upper bushings and I guess I'm going poly for the lower inners front and rear. Although there is time before the first race to get sphericals in the lowers. Hmmmmmmmmmmm.

afm

iTrader: (3)

There are some moderately affordable 7/8 drill bits on Amazon that work okay as low-budget hand reamers after pressing.


Or the 135-degree version.

Kimba

That would definitely be easier. Does the drill bit give a perfect fit, free but no play?