Seefo

iTrader: (5)

I don't get it. why do you want a custom belt? who doesn't make a 6-point harness with a 2" lap belt and a camlock? Every Scroth 6-point belt other than the clubman is like that. If you can find those things in a $130 belt already, then why are you posting? thats about 1/3 the price of most other 6-points. go ******* buy it.

You are pretty damn close to full retarded right now.

Leafy

iTrader: (1)

Where in the name of **** are you seeing a 6 point cam lock harness that isnt g-force for under $160?

Dunning Kruger Affect

Go buy a Schroth Rallye 4 ASM and make sure that you route the breakaway so that it ruptures your ******* when you lose it at a blistering 35mph when you hit the only lamp post in the parking lot.

OGRacing

iTrader: (1)

you can call simpson for what you want custom made. they don't do the whole dealer makes a custom belt thing. i can tell you it's going to cost more than 130 bucks.

I know the topic of cam locks releasing was brought up. We have had some issues with Corbeau cam locks popping open. I personally experienced this on a corbeau cam lock. driving down the highway and "pop" my harness is undone. Got home cut them out and threw them in the trash. That was the last cheap harness I ever bought.

hi_im_sean

iTrader: (3)

Can I blow your budget by $10?
http://www.soloperformance.com/Ultra...ss_p_1545.html

hi_im_sean

iTrader: (3)

Sorry I failed reading comprehension today. Make that $20. And I think it's a 3".
http://www.soloperformance.com/Ultra...s-_p_1546.html


Edit- verified on website it's a 3"

OGRacing

iTrader: (1)

6 Things You Need to Consider Before Buying Harnesses - OG Racing Blog

here are 6 things to consider when looking at harnesses. this link will be added to first post.

Leafy

iTrader: (1)

While casually paroosing the latest fasttrack.

http://scca.cdn.racersites.com/prod/...k-Sept%201.pdf

Recommended Items for 2015
The following subjects will be referred to the Board of Directors for approval. Address all comments, both for and against,
to the Club Racing Board. It is the BoD’s policy to withhold voting on a rules change until there has been input from the
membership on the presented rules. Member input is suggested and encouraged. Please send your comments via the form at
www.clubracingboard.com.

GCR
1. #14272 (Richard Patullo) Seat Belt Expiration
Change 9.3.19.G.1.: 1. Restraint systems meeting SFI 16.1 or 16.5 shall bear a dated SFI Spec label. The certification
indicated by this label shall expire on December 31st of the 5th year after the date of manufacture as indicated by the
label. If for example the manufacture date is 2014 the fifthyear after the date of manufacture is 2019.

Now this is interesting.

Dunning Kruger Affect

Speaking of interesting, someone is selling a G-Force camlock belt in the For Sale section, Leafy. It has your name on it.

OGRacing

iTrader: (1)

That is interesting. now SCCA autocross harnesses must be under 5 years old.. Before they didnt have a date required.

Leafy

iTrader: (1)

CLUB RACING BOARD

OGRacing

iTrader: (1)

I'm looking i don't see it under club racing board. what page?

Take it easy on the caps..

Leafy

iTrader: (1)

Page 14, sorry, caps lock was on for work.

ILoveOffRamps

iTrader: (2)

TLDR: Have Cobra Sebring. Can't get it fit in the car or on me. Interested in Racetech 4009HR. Have you seen it in a miata?

Question: Has anyone seen a Racetech RT4009HR in a miata before? Does it fit with a decent amount of rake to it?

Purpose: Enduro racing w/ 2 hour driver stints.
Want: I want to move up to a composite halo seat.

Frame to Fit: I'm 5'10"ish and 185. 34/36 waist or so. Average proportions on frame.

Background:
My first seat was a Ultrashield Pro Road Race 10°. Love the way I fell INTO the seat, the fit around the waist, ribs etc. I had the entire seat mounted at about 20°. It was perfect.

Ultrashield Catalog - Road Race Seats - Standard Road Race Seats - Pro Road Race Seat

I went to the local SCCA Majors event in April/May and sat in several seats, and decided on the Cobra Sebring (not the ultralite shown in the picture).


Sebring Pro - Cobra Seats
However in 2008ish there was a design change that apparently made my 2014 seat not the same as the 2007 seat I sat in. I don't fit in the new design.

Current State:
I wasn't afraid to notch the tunnel, so I cut it out and still can't get the seat to clear the main hoop gusset (because the halo is too wide), or square with the wheels/pedals while still far enough back to not be "on the wheel". I don't like how the shoulder wings push my shoulders forward (awkard) and I feel like I'm on the seat and not in it. When I pull the cushions out, I'm down in the seat (not comfortable though) but then I'm too low for my harnesses to be installed correctly (below my harness bar). Need to get rid of the Sebring quickly and find something else that WORKS!

Future State:
While at the Majors, I sat in a Racetech 19 (that's all of the model code he knew) and I liked it. Has anyone see one in a miata with a spec miata type cage? Did it have a decent amount of rake to it? I would prefer first hand experience over conjecture.
]

Racetech RT4009HR : Racetech USA
I'm guessing the seat is 4009 because I don't remember it having the air vent like the 4019 did.

AlwaysOnKill

I've got a question for you . I'm 6.0 220 with 36 waist, wide shoulders and I found a seat that fits me well ( ultra-shield road race ) but after reading the possible spinal in jury's with aluminum seat with back braces .Ive kind of steered myself to a seat like a sparco sprint 5 . Now I know I can't fit a sparco sprint 5 due to my size ,so my question really is .... What is a good seat that will fit me and still fit in the miata ?

UrbanSoot

iTrader: (24)

Currently using a Cobra Suzuka on GarageStar seat bracket. Racequip 3" 6 point camlock harness. Seat is very comfortable, but isn't lining up to the steering wheel (about 1" off center) which isn't the end of the world. I think my seat is the wider version so it's not ideal for me (28 waist size).

I have a brand new Momo Supercup which I'm going to install when I have some spare time. Tried sitting in it and it seemed really nice. Won't know for sure until it's installed.

Nagase

iTrader: (6)

Anyone know what non-boxed in seats might be safer than stock? Like the OMP Style, or the Recaro Specialist? Just where you can turn 90 degrees to get out.

Leafy

iTrader: (1)

I dont see why an aluminum seat cant be safe. Hundreds of roundy rounders in marginally or well installed aluminum seats crash every year and normally in significantly more violent crashes than you typically get on a road course and there's never been a big outcry against the aluminum seats in that community. Follow the manufacturer's instructions on install and I dont see how it would be unsafe.

sixshooter

iTrader: (12)

Lies.

hornetball

iTrader: (4)

ANY seat can be installed in an unsafe manner.

Personally, I love my US SM16. Just came off 3 solid days of track time in it. Fits like a glove.