This is the projector housing I used:
Bi-xenon: Morimoto Mini H1 5.0 - HID Projectors from The Retrofit Source Inc

Here are the bulbs:(had to be VERY slightly modified to fit the housing)


and here is the relay kit:
Bi-xenon: 'MotoControl 9003/H4/HB2 - Relay Harnesses from The Retrofit Source Inc

I wasn't interested in Xenon lights so this was all I needed.

If you want Xenon lights just buy this entire kit:
Bi-xenon Morimoto Mini Stage III Kit (H1) - Complete Retrofit Kits from The Retrofit Source Inc

Can you get some shots of the output on a wall of just one projector with you parked around 30-40ft? I'm very intrested to see how they preform with a halogen bulb.

Any idea how much weight you saved?

I saved 17 lbs

Nice. To-do list.

Tntuba, can you post the mounting setup a bit better please. I already have the projectors I just need mounting ideas!

Finished my setup tonight. I am happy with the weight savings and they give me plenty of light or what I need. The brackets were scrapped together from some spare aluminum and you can see the beam vibrating at idle in the garage but nothing you can notice while driving.

Headlight covers courtesy of Wildo's contact
Low beam projectors courtesy of Wildo's link
Ebay clear turn signals hacked with a dremel to be just clear covers

https://www.miataturbo.net/attachmen...ine=1365126944

https://www.miataturbo.net/attachmen...ine=1365126944

https://www.miataturbo.net/attachmen...ine=1365126944

https://www.miataturbo.net/attachmen...ine=1365126944