Need tuning for a S/C miata using MS3 & E85, seattle washington area
 

I am currently building a S/C Miata to complete in NASA TT3 in Northwest Region.

spec:
99' 1.8 build engine(not yet install)
M62 Supercharge TDR tensioner and intercooler.
MS3 with E85, 700cc ID injector

anyone know of a good tuner near Washington area?
I live in Vancouver BC, and I have already have a shop to tune for me one year ago with my stock motor.....the car was running rough and sometime it will just lost power...felt like 80whp....than it will be back to normal(185whp) after awhile.....I think it must have been with the tuning....soon I will be putting my new built engine from fab9 tunning....so I just want to find a shop that can get it done properly...

thanks...

someone recommend me "the Dub shop" have anyone heard about them?

That either sounds like a sensor loosing connection, or an intermitent mechanical failure, such as a coil, injector, fuel pump, knock sensor, etc. You can do nothing on the MS to cause it to loose 80 hp briefly for no reason, it's not a tune.

Take a drive down and see Aaron at English Racing. They're in Camas, WA. Give them a call to schedule a tuning appointment.

English racing as in "Holy shit is that GTR fast!"?

Saw them run their GTR in Wakeman Ohio on the 17th... words can't describe seeing that thing burn down the track.

Keith

Yes that English Racing. That's where we bring my car, project Lazarus, and a few other cars. Same AWD dynojet they used for that GTR. Obviously with the front rollers unhitched.

Kris at KO Racing in Oregon City is top notch. He does more turbo than hoover but he understands more about tuning than any guy I have ever spoken to.

Another Vancouver, BC member coming into chime in here. For local support check out Bill at Indy Speed Shop.

If you're willing to travel John Reed Racing is the man to go to.

Mario at Dub Shop or Kris at KO Racing are both well regarded tuners. They are both in our dealer network. I would recommend either.

If you dont want to go as far as all the other suggestions Bob at drift office does a great job. Don't let the name of the shop fool you. They are very knowledgable. Speed factory or Illtech come to mind too. All greater Seattle area.

Edit: just saw MS3, Drift office doesn't do MS. Speedfactory or Illtech, Maxwell power potentially

Dom from Maxwell is now in Ohio, so write that off the list

Looking for a tuner in indiana - ohio, do you know where / whet shop in ohio is Dom at?

Dom is now working out of TurninConcepts (TIC), if you do book a tune with him tell him Austin says hi ;)

Try AIM Tuning:
http://aimtuning.com/

Shane is working from his home now, sold the dyno and most the big tools.
I had Aaron at pure tuning for my last tune, he was cheaper than Dom at $150/hr but he is 4 hrs away and he does not regularly work with MS. So im looking for someone that is very familiar with MS and a little closer.
https://www.miataturbo.net/attachmen...ine=1413643285

Thx guys! Too bad my engine has not been here yet....4months wait already
I think I will try either the dub shop or ko racing

Would't explain the rough running, but the loss off power sounds like I had on a MX5 with a M45 kit where the bypass would stick open some times.

But before when I only use the power card and race gas it was working fine. After I switch to e85 and ms3 it start doing it

Hit up Richie at Richie's garage/RDE autosport. He is a buddy of mine and will get you taken care of. He is in Olympia 360 688 7100

Thx....but I am still waiting fab9tuning to sent me the engine......almost 5months