New Wing to Test
#362
Supporting Vendor
iTrader: (3)
Join Date: Jul 2006
Location: San Diego
Posts: 3,303
Total Cats: 1,216
Joel, Keith will probably reply directly soon and might have more up to date info but last I heard on that subject confirmed what you've already read - a friend inquired about the mounts and FM said there are no plans to produce any more, it was a one-time thing.
However, I do know that Blackbird Fabworx makes uprights for the COT wing - trunk rain channel mount similar to mine, rear frame rail mount, whatever you would like. Moti has one on his own car. Various finishes available depending on your budget - from basic CNC cut aluminum (cheaper) to smooth finish and anodized. International shipping should be possible. Oh, and BFW makes new endplates for the wing too if you need those.
His contact is moti@blackbirdfabworx.com if you want to inquire further.
-Ryan
However, I do know that Blackbird Fabworx makes uprights for the COT wing - trunk rain channel mount similar to mine, rear frame rail mount, whatever you would like. Moti has one on his own car. Various finishes available depending on your budget - from basic CNC cut aluminum (cheaper) to smooth finish and anodized. International shipping should be possible. Oh, and BFW makes new endplates for the wing too if you need those.
His contact is moti@blackbirdfabworx.com if you want to inquire further.
-Ryan
#366
Hello guys,
I've just bought a COT wing for my car and i'm searching for mount options.
Will a new group by is going to be made by FM ?
I own an NA so I can't buy the NB one that FM have on stock (or maybe is it possible tout modify it to make it fit an NA ?)
Thanks
Joël
I've just bought a COT wing for my car and i'm searching for mount options.
Will a new group by is going to be made by FM ?
I own an NA so I can't buy the NB one that FM have on stock (or maybe is it possible tout modify it to make it fit an NA ?)
Thanks
Joël
There's no pretty way to make an NB unit fit an NA. You'd have to change the angle of the bends at the bottom as well as one of the mid bends, as the amount of twist in the mount is different.
#368
Supporting Vendor
iTrader: (3)
Join Date: Jul 2006
Location: San Diego
Posts: 3,303
Total Cats: 1,216
Awesome. Looks good! Can't tell from the pics, are those the flat endplates or the shaped airfoil ones? Make new endplates soon, even if they are the flat ones, there's a lot of improvement to be had.
-Ryan
-Ryan
#372
Craigslist and the circle track community seem to be the current best bet for the wings. Even at $499, it's still a pretty good deal compared to a new APR.
I've got a "show only" wing here that I'm going to try to modify to make it functionally strong enough. If I can do that, I'll make sure it's a repeatable process. I think there are a couple of levels of show only wings, this one is the lowest.
I've got a "show only" wing here that I'm going to try to modify to make it functionally strong enough. If I can do that, I'll make sure it's a repeatable process. I think there are a couple of levels of show only wings, this one is the lowest.
#375
Senior Member
Thread Starter
iTrader: (21)
Join Date: May 2008
Location: San Antonio
Posts: 733
Total Cats: 17
Just in case one of you might be interested...I think I am going to sell my COT wing and FM NB Mounts. I think I am going to keep my V8 build a street car and that's what I had originally bought the COT wing for. Probably $600 for all of it. It has the road race end plates.
Before I sell it, I will go over and get some side by side pics of an actual grand am wing cross section for some of you that have been wondering what (if any) difference there is between the two profiles.
Before I sell it, I will go over and get some side by side pics of an actual grand am wing cross section for some of you that have been wondering what (if any) difference there is between the two profiles.
#376
Have my COT wing for sale with mounts if anyone is interested.
https://www.miataturbo.net/miata-par...ardware-81314/
https://www.miataturbo.net/miata-par...ardware-81314/
#377
Supporting Vendor
iTrader: (3)
Join Date: Jul 2006
Location: San Diego
Posts: 3,303
Total Cats: 1,216
How many of you guys who bought the COT wing are still using either the flat endplates that came with it or other dinky solutions?
Have some end-plate stuff in the works, curious if the COT crowd is interested in a design specifically for them..
-Ryan
Have some end-plate stuff in the works, curious if the COT crowd is interested in a design specifically for them..
-Ryan
#378
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
I am using them. I would like to get larger endplates eventually to increase the efficiency of the wing ... but due to no front splitter/diffuser, I am severely limited in how much downforce from the wing I can run before understeering my way to victory on track.
So put me down as interested. One of this winters' projects is the front splitter. I will then need more rear downforce for balance. Achieving that via greater efficiency, allowing me to run less angle than otherwise, is win.
So put me down as interested. One of this winters' projects is the front splitter. I will then need more rear downforce for balance. Achieving that via greater efficiency, allowing me to run less angle than otherwise, is win.
Last edited by Mobius; 10-06-2014 at 03:35 AM.