SFBay: '99 built block, NB fuel rails, injectors
SFBay: '99 built block, NB fuel rails, injectors
Up for sale are some parts from our failed engine build. All prices are OBO.
SPEC SZ81A Aluminum flywheel. I actually can't find a weight spec, but the PO swears it's <10lbs. Friction plate worked fine despite the looks. New ones are available for $90, though.
Asking $190
MSM Master cylinder. Pulled from an 04 with 44k miles. 15/16" diameter, so great to reduce pedal travel on an earlier car.
Asking $25
Garagestar type 1 stainless front license plate bracket. For cars without fogs.
$35
VICS intake manifold. Includes throttle body. Great condition except for broken nipple on VICS solenoid.
Asking $65
VICS intake manifold, bare. Was going to polish.
Asking $25
Left NB1 tail light, with small crack.
Asking $15
NB1 AC compressor. Worked when AC was deleted.
Free with purchase
NB1 Alternator. Worked great.
$30
NB1 Injectors
Need a rebuild since the plastic caps got dented while in storage.
Asking $40
NB2 Fuel rail and injector harness
22k miles on these parts
Asking $40
NGK spark plug wires, little use.
Asking $10
BP4W dipstick without broken handle
Asking $7
NB2 (fits NB1 as well) crank damper with 4 tooth CKP plate.
The plate can be modified to give variable timing on an NB1
Asking $5
NB1 EGR pipe.
Free with purchase
SPEC SZ81A Aluminum flywheel. I actually can't find a weight spec, but the PO swears it's <10lbs. Friction plate worked fine despite the looks. New ones are available for $90, though.
Asking $190
MSM Master cylinder. Pulled from an 04 with 44k miles. 15/16" diameter, so great to reduce pedal travel on an earlier car.
Asking $25
Garagestar type 1 stainless front license plate bracket. For cars without fogs.
$35
VICS intake manifold. Includes throttle body. Great condition except for broken nipple on VICS solenoid.
Asking $65
VICS intake manifold, bare. Was going to polish.
Asking $25
Left NB1 tail light, with small crack.
Asking $15
NB1 AC compressor. Worked when AC was deleted.
Free with purchase
NB1 Alternator. Worked great.
$30
NB1 Injectors
Need a rebuild since the plastic caps got dented while in storage.
Asking $40
NB2 Fuel rail and injector harness
22k miles on these parts
Asking $40
NGK spark plug wires, little use.
Asking $10
BP4W dipstick without broken handle
Asking $7
NB2 (fits NB1 as well) crank damper with 4 tooth CKP plate.
The plate can be modified to give variable timing on an NB1
Asking $5
NB1 EGR pipe.
Free with purchase
Last edited by scenturion; Nov 5, 2014 at 10:49 PM.
0
Haha, that's kinda funny. I thought this engine was setup for 11:1? Or is this not that engine? No idea how much stuff Larry accumulated, but I recognise his sickness as we have that in common.
0
He swears theyre 10:1 with an additional half point from the mods he did to the head. He does have quite a stash though. If there's anything else you know of that you want, let me know and I'll help him extricate it more quickly.
0
I'll have to shoot him and email or stalk him on NCR for a while.
0
