Tons of go fast parts feeler ARTech parts, etc.
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Chicagoland
Posts: 1,376
Total Cats: 4
Tons of go fast parts feeler ARTech parts, etc.
Okay, here it goes...I am going to go crazy for 2011 a whole new set up basically to turn my car into a machine. This is a feeler, I want to get potential buyers for these parts before I act on them. I do not have pictures of everything right this second, however, if you look back on my old posts you'll see pictures of everything that I am selling. Here it goes most parts are for 1.6L Miata--with the exception of a few.
ARTech Ramhorn Manifold ceramic coated looks new: $600
Tial 38MM MVS Wastegate Black: $200
ARTech V-Band Stainless dumptube, downpipe: $300
3” Exhaust Mild Steel, will be coated w/high temp black spray V-Band Magnaflow Muffler: $400
I would like to sell this as a kit, unless I can find buyers for each, because these are made to work together $1400
-6AN line silicon blue, 350 PSI max pressure 6 foot: $50
Flipside Intake manifold: $350 PENDING
AEM EMS: $650 SOLD
Tial 50MM BOV: $150
RC750 Injectors w/resister pack: $150 PENDING
PTE Billet 5857 DBB, Coated hotside .63 T3: $700
*Please note, all the hotside parts are made to work together as a kit, however, I have a V-Band adapter on the hotside of the turbo. I am not sure this will make fitment an issue if you have a V-Band Hotside or not.
Most of these parts have very little mileage, especially the hotside, turbo parts--these have about 1000 miles total. Like I said, this is a feeler. I will start pulling parts once I have potential buyers for most of the main parts listed above. Remember these prices do not include 3% Paypal fees.
Last edited by jtothawhat; 12-11-2010 at 04:34 PM.
#10
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Chicagoland
Posts: 1,376
Total Cats: 4
Older style BOV, red in color. I have no idea what spring is it in, but I have ran my ran as low as 7 psi with this same spring and has high as 28 psi with this spring.
More efficient, more power, more boost.
I do in my thread under media section, just go a few pages back. The name is 'No build thread, but here are some enginebay pics' The MVS is brand new, doesn't have a chip on it, black in color. Only thing is two of the port screws fell off so I have replaced with with a bolt and some washers. The new bolts are like $3.50 from Tial I believe. Other than that perfect wastegate, MVS V-Band with a 14 pound spring.
I do in my thread under media section, just go a few pages back. The name is 'No build thread, but here are some enginebay pics' The MVS is brand new, doesn't have a chip on it, black in color. Only thing is two of the port screws fell off so I have replaced with with a bolt and some washers. The new bolts are like $3.50 from Tial I believe. Other than that perfect wastegate, MVS V-Band with a 14 pound spring.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM