EGT with MS3PNP curent CAN EGT solutions ??
Thread Starter
Junior Member
Joined: Jul 2016
Posts: 431
Total Cats: 76
From: Orlando, FL
EGT with MS3PNP curent CAN EGT solutions ??
Looking at installing a 4 channel EGT system that will communicate with my Trackspeed supplied MS3PNP on an NB2.
Can not find one of the old Megasquirt CAN/EGT modules. Will any of the others like AIM, ECU Master etc be made to communicate with Tunerstudio & Megasquirt for on track datalogging?
Looks like I will have to use CAN, as there are not 4 available channels otherwise?
Before I mill & tap 4ea. 1/8"NPT holes in my unobtanium Trackspeed turbo manifold I would like to have sensors in hand.
Suggestions and pictures would be appreciated.
Can not find one of the old Megasquirt CAN/EGT modules. Will any of the others like AIM, ECU Master etc be made to communicate with Tunerstudio & Megasquirt for on track datalogging?
Looks like I will have to use CAN, as there are not 4 available channels otherwise?
Before I mill & tap 4ea. 1/8"NPT holes in my unobtanium Trackspeed turbo manifold I would like to have sensors in hand.
Suggestions and pictures would be appreciated.
Reply
0
0
https://www.auberins.com/index.php?m...dex&cPath=20_3
These guys may have some useful hardware for your project.
These guys may have some useful hardware for your project.
Reply
0
0
Reply
0
0
Senior Member
Joined: Dec 2007
Posts: 1,459
Total Cats: 132
From: ATL
I'm using the ECUMaster EGTtoCAN module with my MS3PNP. Frankly, I was terrified of learning "How to CAN" and everything I read online raised my anxiety level even higher. But after using their software to talk to the module and wiring it all up, I was pleasantly satisfied.
Of course, YMMV.
Of course, YMMV.
Reply
0
0
Thread Starter
Junior Member
Joined: Jul 2016
Posts: 431
Total Cats: 76
From: Orlando, FL
https://www.auberins.com/index.php?m...dex&cPath=20_3
These guys may have some useful hardware for your project.
These guys may have some useful hardware for your project.
I'm using the ECUMaster EGTtoCAN module with my MS3PNP. Frankly, I was terrified of learning "How to CAN" and everything I read online raised my anxiety level even higher. But after using their software to talk to the module and wiring it all up, I was pleasantly satisfied.
Of course, YMMV.
Of course, YMMV.
Might have a lead on one of our advertisers prototype.
Reply
0
0
Junior Member
Joined: Jan 2019
Posts: 152
Total Cats: 24
From: NH
I put together an EGT circuit with a jbperf tinyiox board. Still haven’t put it on the car though. Tested fine on the bench with egt probe and a lighter.
idk if you can still get the boards from jbperf
EGT components: https://www.diyautotune.com/product/...kit-egt-input/
idk if you can still get the boards from jbperf
EGT components: https://www.diyautotune.com/product/...kit-egt-input/
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
