Just wondering what Other people are running with their Tan injectors

 

14~15 psi, but with Emanage and the duty cycle is too high(in the 90's), so most of the time I run it less.

 

Wow. Im running 7psi with my set up in my sig, and I thought i was pushing it! lol

 

Without an FMU, you are.

 

Most assuredly he is running greddy's vortec FMU. Let's hope at least.

I got ~200 rwhp out of the tans with a 190HP and BEGi FMU. Duty cycles were over 90, as I found out later, but that's on the stock ECU's map. I was rich and had fuel for more power, but lacked timing control to keep going.

 

Most assuredly!

 

Lol. Yes. I have The Vortech FMU with the 12:1 Disc

 

The 12:1 is probably too large. If you have the set, drop down to an 8:1

 

Nope. i dont have the set, too large? What would be some of the bad characteristics it would cause?