Compression Ratio of a 1.6?
Elite Member
Joined: Apr 2010
Posts: 2,826
Total Cats: 66
From: Newcastle, Australia
Dynamic compression ratio is very specific.
The static compression is 9.4 where as the dynamic ratio changes based on tune, rpm, throttle opening boost. basically Dynamic compression is the static ratio multiplied by the map value making it into the cylinder (in kpa) divided by 101.
Dann
The static compression is 9.4 where as the dynamic ratio changes based on tune, rpm, throttle opening boost. basically Dynamic compression is the static ratio multiplied by the map value making it into the cylinder (in kpa) divided by 101.
Dann
Reply
0
0
Thread Starter
I'm Miserable!
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
http://www.wallaceracing.com/dynamic-cr.php
I did at 200ft alt
Boost pressure doesn't seem to change DCR, inlet valve closing ABDC does by a lot.
Sure its DCR for reason, and this probably at one point
I did at 200ft alt
Boost pressure doesn't seem to change DCR, inlet valve closing ABDC does by a lot.
Sure its DCR for reason, and this probably at one point
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
