Bernd's Tubro NC
Here You can see a really serious project.
This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque. It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system. https://s19.directupload.net/images/191213/8tdagqy5.jpg https://s19.directupload.net/images/191213/bpf4duun.jpg https://s19.directupload.net/images/191213/st27oqew.jpg https://s19.directupload.net/images/191213/pslc4h4y.jpg https://s19.directupload.net/images/191213/tbei2d79.jpg https://s19.directupload.net/images/191213/pya75ybo.jpg Best regards Guido from SPS |
A forged 2.0? What manifold are you using? What wheel and tire specs?
|
Hi, the manifold is custom built with an external wastegate. Tires are 255/40 ZR17. Wheels are 9x17 Rota Titan with 42mm offset and spacers.
Best regards Guido from SPS |
We made some progress meanwhile:
https://s12.directupload.net/images/200516/kuk3wss2.jpg https://s12.directupload.net/images/200516/dcwwh8y4.jpg https://s12.directupload.net/images/200516/m77dzwo2.jpg https://s12.directupload.net/images/200516/bbiqqaon.jpg And this is a dyno sheet with 1.4bar/20.3psi. The power is at the flywheel. https://s12.directupload.net/images/200516/qj733hfk.jpg Best regards Guido from SPS |
Originally Posted by Guido@SPS
(Post 1570991)
We made some progress meanwhile:
https://s12.directupload.net/images/200516/kuk3wss2.jpg https://s12.directupload.net/images/200516/dcwwh8y4.jpg https://s12.directupload.net/images/200516/m77dzwo2.jpg https://s12.directupload.net/images/200516/bbiqqaon.jpg And this is a dyno sheet with 1.4bar/20.3psi. The power is at the flywheel. https://s12.directupload.net/images/200516/qj733hfk.jpg Best regards Guido from SPS |
All times are GMT -4. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands