99-00 MP62 kit compatibilty to '97 1.8
 

Not set on the idea but am considering a used Track Dog Racing MP62 hotside kit for a 99-00 for my 1997 Miata. So other than the fuel/timing cards not being compatible what else will or will not work? I have engine management covered since I already ordered a MS3 basic from Reverant. Thanks in advance for any assistance!

Chad

You just need the NA mounting kit, not sure what is different but am told it is. Duct tape works well.

Thanks for the reply but that is incorrect. As I had thought, Gary with TDR said that everything will work except for the PNP harness and the dummy throttle body which has the same footprint but the IACV is different so if I was using stock computer then I would have to get the dummy TB fir a 94-97 but since I will be using a MS then the stock IACV isn't needed.

I forget I'm the only one running a single TB with no dummy b/s. The way a car should be. I will sell you a real man adapter. Just have to source your own bov.

Dyno proven to give you 10hp.
0 lag, yes hot sides on miata's have lag
Car will idle like stock unlike the way it will never idle right with tdr/moss kits

https://www.miataturbo.net/random-su...tb-mp62-58454/